Hightower GX1 AXS RSV 2024
Build Kit & Specs
Hightower GX1 AXS RSV 2024
Sizing & Geometry
Find your Size
If you're on the cusp between the recommended height range of two sizes, the absolute best thing is to try to ride them both. At a minimum, check the stack/reach measurements on your current bike and compare it to the new model you are looking at to get an idea of a fit you are already comfortable with. If riding the bike is not an option, consider the following.
A larger size frame will be more stable, and will give you more room to move without upsetting the weight-balance of the bike. The larger size will put the front wheel further in front of you, which gives the feeling of security and conversely, it will require more significant body movements when you WANT to shift the weight-bias of the bike. Think hard about your riding style and how active/intuitive you want it to be vs stable and speedy. You'll need to work a bit harder to muscle the larger bike around.
Not all bodies at a given height are the same. If you have longer legs and a shorter torso than the average person your height, that may push you towards the smaller of the recommended sizes. If you're all torso and arms, most likely you'll want to size up.
Pequeño
Medio
Grande
Extra Grande
XX-Grande
154cm
5'1"
-
167cm
5'6"
Alcance: 430mm
165cm
5'5"
-
175cm
5'9"
Alcance: 455mm
175cm
5'9"
-
185cm
6'1"
Alcance: 475mm
182cm
6'0"
-
193cm
6'4"
Alcance: 495mm
190cm
6'3"
-
200cm
6'7"
Alcance: 520mm
All units are in millimeters or degrees.
| s | m | l | xl | xxl | |
|---|---|---|---|---|---|
| Alcance (Máx./Mín.) | 430/427 | 455/452 | 475/472 | 495/492 | 520/517 |
| Apilado (Alto/Bajo) | 611/613 | 625/627 | 634/636 | 652/654 | 665/668 |
| Ángulo del tubo de dirección (Alta/Baja) | 64.8°/64.5° | 64.8°/64.5° | 64.8°/64.5° | 64.8°/64.5° | 64.8°/64.5° |
| Ángulo del tubo del sillín (Alto/Bajo) | 77°/76.7° | 77°/76.7° | 76.7°/76.4° | 76.9°/76.6° | 76.9°/76.7° |
| Distancia entre ejes (Alta/Baja) | 1183/1183 | 1217/1218 | 1244/1245 | 1276/1276 | 1310/1311 |
| Delantero central (Alto/Bajo) | 752/752 | 783/783 | 807/807 | 836/836 | 867/867 |
| Centro trasero (alto/bajo) | 431/432 | 434/435 | 437/438 | 440/441 | 443/444 |
| Altura pedalier (Alta/Baja) | 342/339 | 342/338 | 342/338 | 342/338 | 342/338 |
| Caída BB (Alta/Baja) | 31/34 | 31/34 | 31/34 | 31/34 | 31/34 |
| Altura de entrepierna (Alta/Baja) | 706/701 | 708/703 | 711/706 | 714/709 | 719/714 |
| Longitud del tubo de dirección | 100 | 115 | 125 | 145 | 160 |
| Longitud del tubo del sillín | 380 | 405 | 430 | 460 | 500 |
| Longitud del tubo superior (Alta/Baja) | 571/572 | 599/600 | 626/627 | 647/648 | 674/675 |
Hightower GX1 AXS RSV 2024
Setup & Support
Whether you’re the proud owner of a Hightower or are just digging deep into the details you’ll find it all here.
MY24 Rockshox Lyrik Select Plus 150
| Peso del Ciclista (libras) | Peso del ciclista (kg) | Presión (psi) | Rebote (desde cerrado) |
|---|---|---|---|
| 100 | 45 | 40 | 15 |
| 120 | 54 | 50 | 13 |
| 140 | 64 | 60 | 12 |
| 160 | 73 | 70 | 11 |
| 180 | 82 | 80 | 10 |
| 200 | 91 | 90 | 9 |
| 220 | 100 | 100 | 8 |
| 240 | 109 | 110 | 6 |
Rockshox Super Deluxe Select Plus
| Peso del Ciclista (libras) | Peso del ciclista (kg) | Presión (psi) | Dime | Rebote (desde cerrado) |
|---|---|---|---|---|
| 100 | 45 | 95 | 28-30%, 15-17mm | 8 |
| 120 | 54 | 120 | 28-30%, 15-17mm | 8 |
| 140 | 64 | 140 | 28-30%, 15-17mm | 7 |
| 160 | 73 | 165 | 28-30%, 15-17mm | 7 |
| 180 | 82 | 185 | 28-30%, 15-17mm | 6 |
| 200 | 91 | 210 | 28-30%, 15-17mm | 6 |
| 220 | 100 | 230 | 28-30%, 15-17mm | 5 |
| 240 | 109 | 255 | 28-30%, 15-17mm | 5 |
| 260 | 118 | 275 | 28-30%, 15-17mm | 4 |
Hightower 4 Small Parts
Shop Spare Parts
Headtube Badge, Downtube Protector and Shuttle Guard
| Label | Name | Blurb | Cantidad | Par de apriete | Número de pieza |
|---|---|---|---|---|---|
| A | Head Tube Badge | Clean frame surface, center on headtube | 1 | 67-19217 | |
| B | Shuttle Guard Mount | 1 | 30-23750 | ||
| C | Shuttle Guard | 1 | 30-22560 | ||
| D | M4x8 BHCS | Apply grease to threads | 2 | 0.65 Nm | 26-21249 |
| E | Downtube Protector | 1 | 30-23880 | ||
| F | M4x12 BHC | Apply grease to treads | 2 | 0.65 Nm | 26-18382 |
| G | 36.4 Seat Collar | 1 | 34-20201 |
Cargando
Upper Link and Lower Link Hardware
| Label | Name | Blurb | Cantidad | Par de apriete | Número de pieza |
|---|---|---|---|---|---|
| A | M10x23 Screw | Apply Loctite 242 to threads only, apply grease to shaft only | 2 | 16 Nm | 26-20122 |
| B | M8x45 Shock Bolt | Apply Loctite 242 to threads | 1 | 20 Nm | 26-22461 |
| C | M8x43 Shock Bolt | Apply Loctite 242 to threads | 1 | 20 Nm | 26-18289 |
| D | M8x2 Flip Chip NDS | Apply grease to surface | 1 | 26-21452 | |
| E | M8x2 Flip Chip DS | Apply grease to surface | 1 | 26-21451 | |
| F | Pivot Axle M10x81 | Apply Loctite 242 to threads only, apply grease to shaft only | 2 | 13.6 Nm | 08-23720 |
| G | M5 Tapered Washer | Apply grease to surface | 3 | 26-15632 | |
| H | M5 Washer | 3 | 26-12652 | ||
| I | M5x20 SHCS | Apply Loctite 242 to threads | 3 | 5.6 Nm | 26-15946 |
| J | Pivot Axle M10x69 | Apply Loctite 242 to threads only, apply grease to shaft only | 1 | 08-23721 |
Cargando
Rear Axle, Chainstay Protector, Derailleur Hanger, and Fender
| Label | Name | Blurb | Cantidad | Par de apriete | Número de pieza |
|---|---|---|---|---|---|
| A | Rear axle 12x173.7 | Apply grease to shaft and threads | 1 | 08-22209 | |
| B | SCB UDH | Interchangeable with Sram UDH | 1 | 23-23491 | |
| C | SCB UDH screw | Reverse thread | 1 | 20 Nm | 26-23492 |
| D | Chainstay Protector | 1 | 30-20361 | ||
| E | M3x12 BHCS | Apply grease to treads | 1 | 0.5 Nm | 26-15939 |
| F | Seatstay Protector | 1 | 30-21453 | ||
| G | Lower Link Fender | 1 | 30-23094 | ||
| H | M4x12 BHC | Apply grease to treads | 2 | 0.65 Nm | 26-18382 |
Cargando
Glovebox
| Label | Name | Blurb | Cantidad | Par de apriete | Número de pieza |
|---|---|---|---|---|---|
| A | Glovebox lid | 1 | 26-22843 | ||
| B | Glovebox bezel | 1 | 26-25333 | ||
| C | M3x8 BHCS | Apply Loctite 242 to threads | 4 | 0.5 Nm | 26-23284 |
| D | Glovebox nut | 2 | 30-23225 | ||
| E | M3x6 | Apply Loctite 242 to threads | 1 | 0.6 Nm | 26-22358 |
| F | Storage Bulkhead | Install inside Downtube | 1 | 30-22620 |
Cargando
Upper Link
Cargando
Lower Link
| Label | Name | Blurb | Cantidad | Par de apriete | Número de pieza |
|---|---|---|---|---|---|
| A | Lower Link | 1 | 29-23957 | ||
| B | 6900-1ZR Bearing | 4 | 11-18385 | ||
| C | Bearing Dust Shield | Apply grease to inner surface | 4 | 26-18690 | |
| D | 10x30.5 Bearing spacer | 1 | 26-18691 | ||
| E | 10x41.5 Bearing Spacer | 1 | 26-18692 | ||
| F | M6 Grease Fitting | 1 | 9 Nm | 26-12678 | |
| G | M5x5 Set Screw | Apply Loctite 242 to threads, titghten until flush | 1 | 26-15532 |
Cargando
| Tamaño del cuadro | Clave de configuración | Configurar Cog | 30T | 32T | 34T | 36T |
|---|---|---|---|---|---|---|
| Small | B | 7 | 114 | 116 | 116 | 118 |
| Medium | B | 7 | 116 | 116 | 118 | 118 |
| Large | B | 7 | 116 | 116 | 118 | 118 |
| XLarge | B | 7 | 116 | 118 | 118 | 120 |
| XXLarge | B | 7 | 116 | 118 | 118 | 120 |
| *same setup flip chip hi or low |
Hightower GX1 AXS RSV 2024
$7,299.00
USD
Regular price
$8,299.00
Acceda al exclusivo SCB Owners Club que le brinda acceso a niveles adicionales de soporte al piloto, obsequios, oportunidades y beneficios. ¡Únase al club hoy gratis! Solo le tomará cinco minutos recibir los beneficios de una membresía de por vida.
Más informaciónFabricamos bicicletas Santa Cruz para que sean duraderas y resistentes, y las respaldamos con un soporte legendario y una garantía del más alto nivel.
Santa Cruz Bicycles ofrece rodamientos de pivote de repuesto gratuitos al propietario original durante el tiempo que posea su bicicleta.
Material
C
Delantero (MM)
150
Trasero (MM)
145
Big on wheels, medium on travel, short on fuss, this is the do-it-all bike that does it over and over again thanks to a versatile balance of geo, spec and durability. If you’re not looking for extremes, just something extremely good, the Hightower is your elevator to the mountains.
Profundiza
Especificaciones, tallas y soporte para el Hightower GX1 AXS RSV 2024
Kit de construcción& Especificaciones
Geometría& Tallas
Configuración& Soporte
