Blue bicycle frame with 'Santa Cruz' branding on a white background
Green mountain bike with 'Santa Cruz' branding on a white background

V10 8 MY27

2027 - Present

There's nothing like riding a downhill bike

The V10 is the same bike ridden by the Syndicate to World Cup victories. Fully refined, not redefined, the new V10 is for riders looking to just imitate their heroes on Sunday afternoon or find the best lines in the bike park. The kind of rider who knows there’s no replacement for a proper downhill bike. Lap after lap, day after day nothing stands up to the abuse or gives the thrills a downhill bike can. Nothing.

Carbon CC
Front Travel (MM) 200
Rear travel (MM) 208
Wheel Size 29/MX
Compra parti di ricambio

Specifiche

Scatola movimento centrale Threaded 83mm
Attacco freno posteriore 200mm or 220mm PM
ISCG Standard ISCG05
Interasse ammortizzatore 250mm
Offset della forcella 52mm
Attacco deragliatore anteriore None
Serie sterzo IS41 upper/ IS41 lower (Reach Adjust)
Massima corona consentita 36t
Diametro massimo disco 220mm
Larghezza massima pneumatico 2.5"
Int. mozzo posteriore 157mm
Escursione posteriore 208mm
Sag consigliato 30%
Diametro clamp 36.4mm
Translation missing: it.products.product.specs.seat_post_diameter 31.6mm
Dimensioni boccola anteriore dell'ammo 30x8
Dimensioni boccola posteriore dell'ammo 30x8
Corsa dell'ammortizzatore 75mm
Sistema di sospensione VPP

Allestimenti

Seleziona un allestimento

Telaio Carbon CC MX 208mm Travel VPPâ„¢
Escursione 208mm
Materiale Carbon CC
Diametro ruote MX/29"
Peso 9.73 lbs / 4.41 kg
Ammortizzatore Fox DHX2 Factory Coil

Geometria

Shock Position
Tutte le unità sono espresse in millimetri o gradi.
s m l xl(29)
Reach short mid long 412-420-428 447-455-463 467-475-483 492-500-508
Stack 624 633 637 642
Head tube angle 63 63 63 63
Head Tube Length 100 110 115 120
Rear Center (Long/Mid/Short) 440-445-450 445-450-455 450-455-460 455-460-465
Front Center 785 825 847 874
BB Height 356 356 356 356
BB Drop Front 17 17 17 17
BB Drop Rear -1 -1 -1 17
Wheelbase 1230 1275 1302 1334
Seat Tube Length 435 445 455 465
Seat Tube Angle 77.9 77.4 77.3 77
Standover Height 729 730 731 731
s m l xl
Reach short mid long 411-419-427 446-454-462 466-474-482 491-499-507
Stack 625 634 638 643
Head tube angle 62.9 62.9 62.9 62.9
Head Tube Length 100 110 115 120
Rear Center (Long/Mid/Short) 440-445-451 446-451-456 451-456-461 456-461-466
Front Center 785 825 847 874
BB Height 353 353 353 353
BB Drop Front 19 19 19 19
BB Drop Rear 1 1 1 19
Wheelbase 1231 1275 1303 1335
Seat Tube Length 435 445 455 465
Seat Tube Angle 77.8 77.3 77.2 76.9
Standover Height 726 728 729 729
s m l xl
Reach short mid long 409-417-425 444-452-460 464-472-480 489-497-505
Stack 626 635 639 644
Head tube angle 62.7 62.7 62.7 62.7
Head Tube Length 100 110 115 120
Rear Center (Long/Mid/Short) 440-445-452 446-451-456 451-456-461 456-461-466
Front Center 785 825 847 874
BB Height 351 351 351 351
BB Drop Front 21 21 21 21
BB Drop Rear 3 3 3 21
Wheelbase 1231 1276 1303 1335
Seat Tube Length 435 445 455 465
Seat Tube Angle 77.6 77.1 77 76.7
Standover Height 724 726 726 726

Guida alle taglie

Small
154cm 5'1" - 167cm 5'6" Reach: 412-425mm
Medium
165cm 5'5" - 175cm 5'9" Reach: 447-467mm
Large
172cm 5'8" - 185cm 6'1" Reach: 467-480mm
X-Large
182cm 6' - 195cm 6'5" Reach: 492-505mm

Exploded Diagrams

Image 1
label quantity part_number name blurb torque
A 1 67-19217 Head Tube Badge Clean frame surface, center on headtube
B 4 26-23102 M4x16 BHCS Apply grease to threads 0.65 Nm
C 1 30-25026 Fork Bumper DS
D 1 30-25025 Fork Bumper NDS
E 1 30-22560 Shuttle Guard
F 4 26-18382 M4x12 BHCS Apply grease to treads 0.65 Nm
G 1 30-20093 DT Protector
H 1 30-25335 Rear Fender
I 4 26-15939 M3x12 BHCS Apply Loctite 242 to threads 0.1 Nm
J 1 34-20201 36.4 Seat Collar
Image 2
label quantity part_number name blurb torque
A 1 26-29286 RAHS Upper Offset Apply grease at frame interface
B 1 26-29288 RAHS Upper Neutral Apply grease at frame interface
C 1 26-29285 RAHS Lower Offset Apply grease at frame interface
D 1 26-29287 RAHS Lower Neutral Apply grease at frame interface
E 1 26-29298 M4x85 SHCS Use for size small frame 4.5 Nm
F 1 26-29297 M4x95 SHCS Use for size medium frame 4.5 Nm
G 1 26-29296 M4x100 SHCS Use for size large frame 4.5 Nm
H 1 26-29295 M4x105 SHCS Use for size xlarge frame 4.5 Nm
Image 3
label quantity part_number name blurb torque
A 1 26-21231 M8x50 Shock Bolt Apply loctite 242 to threads 22 Nm
B 4 26-27009 M8x22 Lowhead SHCS Apply Loctite 242 to threads 16 Nm
C 4 26-12682 V10 Outer Bearing Washer Apply grease to inner surface
D 1 26-22461 M8x45 Shock Bolt Apply Loctite 242 to threads 20 Nm
E 1 26-27123 Flip Chip Neutral DS Apply grease to surface
F 1 26-17065 Flip Chip Offset NDS Apply grease to surface
G 1 26-17064 Flip Chip Offset DS Apply grease to surface
H 1 26-27122 Flip Chip Neutral NDS Apply grease to surface
I 1 08-16291 Pivot axle M15x68.5 Apply Loctite 242 to threads only, apply grease to shaft only 20 Nm
J 2 26-15633 M6 Tapered Washer Apply grease to surface
K 2 26-11817 M6 Washer
L 2 26-15947 M6x20 SHCS Apply Loctite 242 to threads 9 Nm
M 1 08-20879 Pivot Axle M15x72 Apply Loctite 242 to threads only, apply grease to shaft only 20 Nm
N 1 26-25329 Cable loop FT NDS
O 1 26-25331 Cable loop SA NDS
P 3 26-15939 M3x12 BHCS Apply Loctite 242 to threads 0.1 Nm
Image 4
label quantity part_number name blurb torque
A 1 30-26670 CS Protector
B 1 26-15634 RD Hanger Bolt Apply Loctite 242 to threads 12 Nm
C 1 23-20089 V10 RD Hanger Short
D 1 23-24890 V10 RD Hanger Neutral
E 1 23-20090 V10 RD Hanger Long
F 1 26-11927 M4x4 Set Screw Apply Loctite 242 to threads 1 Nm
G 1 26-20087 V10 NDS DO chip offset
H 1 23-24889 V10 NDS DO Chip Neutral
I 1 08-24951 V10 Rear axle 12x182 Apply grease to shaft and threads 12-15 Nm
J 1 26-24963 V10 Brake adapter 200
K 1 26-24962 V10 Brake adapter 220
L 2 26-15947 M6x20 SHCS Apply Loctite 242 to threads 9 Nm
M 2 26-11817 M6 Washer
N 1 26-25330 Cable loop FT DS
O 1 26-25332 Cable loop SA DS
P 4 26-15939 M3x12 BHCS Apply Loctite 242 to threads 0.1 Nm
Q 1 30-21453 Seatstay Protector
Image 5
label quantity part_number name blurb
A 1 29-26982 Upper Link
B 4 11-12681 6900-2RS Bearing
C 4 26-15533 M10x3 Washer Apply grease to inner surface
Image 6
label quantity part_number name blurb torque
A 1 29-26981 Lower Link
B 4 11-17708 6902-1ZR Bearing
C 4 26-11612 Bearing Dust Shield Apply grease to inner surface
D 1 26-19126 15x28 Bearing spacer
E 1 26-20880 15x32 Bearing Spacer Apply grease to inner surface
F 1 26-15532 M5x5 Set Screw Apply Loctite 242 to threads, titghten until flush 0.5 Nm
G 1 26-12678 M6 Grease Fitting 9 Nm

Manuals & Files

Se desideri ulteriori informazioni sulla tua bicicletta, consulta il nostro Santa Cruz Bicycles Owner's Manual

FAQs

We designed the V10.8 with a 3-position adjustment at the headtube, lower link, and chainstay. We think the bike feels most neutral in the middle position for all three, and therefore is a good place to start.

Frames and complete bikes include everything you need to adjust the geometry:
Headset cups: +/- 8mm, 0mm
Dropouts: Short, Mid, Long
Lower link chips: Hi/Lo, Mid
Brake adaptor: 220mm, 200mm

No, the frames are specific to each wheelsize, they cannot be converted. Small, Medium, Large all come with MX wheels, while the XL comes with 29" wheels

The V10 comes with +/-8mm offset cups and with centered cups. They are installed in the frame by hand and can be easily adjusted. They accept a standard 1 1/8" IS41 integrated headset.

The V10 uses standard ISCG-05 tabs and should work with most guides that use that standard. E13 LG1 comes stock on the complete bikes, we've also had good experiences with the MRP G5 and SXG. If you're looking for a minimalist-style guide, the OneUp Bashguide is a good choice.

The V10.8 uses a 157x12 rear hub

The V10 has an 83mm threaded bottom bracket and is designed for DH cranks with a 56-57mm chainline

We use 52mm offset forks on our complete bikes, and find that to offer neutral, intuitive handling. That would be our recommendation to start with.

The V10.8 uses a 250x75 shock with 8x30 hardware on both ends

The leverage curve was designed and optimized for a coil shock, but DH-oriented
air shocks can also work. The Fox Float X2 and Vivid Air shocks fit, as long as the
air valve is oriented correctly. Unfortunately, the Rockshox Super Deluxe AIR shock
does not fit, due to interference with the rebound knob. Rockshox coil shocks fit
no problem.