Nomad 6 MY24

No. The Nomad.6 frame is super strong but it is not designed for the side impact loads that dual crown forks place on the frame during a crash. Stick with single crown forks exclusively.

Nomad.6 comes standard with 200mm rear post mount, will accept rotors with adapter up to 223mm

The Nomad.6 comes with two bags - a tube purse and a tool wallet. You should be able to fit a superlight tube, a small pump, tire lever, and misc odds and ends in these two bags.

CC frames use the very best materials and production processes available. Our C Carbon frames have the same features but the trade off for a little less $ is a little more weight. Both versions are made in our own factory, are just as strong and stiff as one another, and have a lifetime warranty.

The frame is UDH-compatible, but comes with our own machined aluminum hanger. You can replace it with another Santa Cruz hanger or a SRAM UDH.

You should definitely try both, but we typically recommend starting in High. In the High setting, the bike rides a little higher in its travel and supplies the rider with more mid-stroke support. In the Low position, the shock rate becomes more progressive, particularly at the end of the stroke, and there’s some bottom-out resistance to be gained.

Swingarm tire clearance is designed for 27.5" x 2.5" max

The Nomad was built to be compatible with all shocks on the market, both coil & air. We haven't tried some of the smaller obscure brands, but it fits anything from Fox and Rockshox. The correct size is 230x65 with 8x30mm hardware front and rear.

There is a difference in feel between the two, but neither is better than the other- just different. The air shock is more progressive than the coil, which allows for a slightly softer setup without worrying about bottoming-out. This will generally offer a smoother ride, but one that can still be ridden very aggressively and not struggle. The suspension will also have a "poppier" and more playful ride, as the air shock will try to get you out of the deep part of travel.
The coil has a slightly more linear feel/ less bottom-out resistance, which encourages a firmer overall setup. This offers the maximum mid-stroke support for berms/park riding/ pushing into turns. If you like a firmer feel, you will probably prefer the coil. If you set the air shock up to offer a similar feel in the mid-stroke, you may struggle to achieve full travel.
These aren't huge differences, but they are enough that we wanted to offer both. Obviously, the air shock offers the advantages of being lighter and easier to tune, so this will be the right choice for the majority of riders.

This bike uses integrated headset cups. The upper up is 41mm and the lower cup is 52mm. The SHIS name is IS 41/28.6 IS 52/40. For Chris King this is a DropSet.3

No, the Nomad.6 is built exclusively for MX wheels - 29" up front, 27.5" in the rear. Trying to convert to other wheel sizes will negatively affect geometry, handling, and performance.

Yes, this bike is equipped with ISCG-05 tabs for easy chainguide mounting. Most guides/bashguards that follow the ISCG-05 standard should fit.

The Nomad.6 geometry is based off of a 170mm fork with 44mm offset. We wouldn't recommend less travel than that, as the BB will get a bit low. Up to 180mm is fine if that's your preference.