V10 8 MY25

2024 - Present

NON C'É NIENTE DI MEGLIO DI UNA BICI DA DH

L'ottava generazione del V10 è la stessa bicicletta utilizzata dal Syndicate per conquistare le vittorie in World Cup. Completamente perfezionata, la nuova V10 è destinata ai rider che vogliono emulare i propri campioni o che puntano ai massimi traguardi. É chiaro che non esiste nulla di paragonabile alle capacità di una vera mountain bike da downhill. Giro dopo giro, giorno dopo giorno, scoprirerte che non vi è nulla di più resistente e performante di una bicicletta da DH. Niente.

Carbon CC

Front Travel (MM) 200

Rear travel (MM) 208

Wheel Size 29/MX

Compra parti di ricambio

Specifiche

Sistema di sospensione	VPP
Escursione posteriore	208mm
Attacco deragliatore anteriore	No compatibility
Serie sterzo	IS41 upper/ IS41 lower (Reach Adjust)
Diametro reggisella	31.6mm
Diametro clamp	36.4mm
Interasse ammortizzatore	250mm
Corsa dell'ammortizzatore	75mm
Compatibilità della forcella	200-203mm
Scatola movimento centrale	83mm Threaded
Larghezza massima pneumatico	2.5"
Massima corona consentita	36t
Dimensioni boccola anteriore dell'ammo	30x8
Dimensioni boccola posteriore dell'ammo	30x8
Int. mozzo posteriore	12x157mm
Attacco freno posteriore	200mm or 220mm Post
Offset della forcella	52mm

Allestimenti

Seleziona un allestimento

Telaio	Carbon CC MX 208mm Travel VPP™
Diametro ruote	MX/29"
Peso	36.81lbs / 16.69 kg
Ammortizzatore	RockShox Vivid Select+ Coil
Forcella	RockShock BoXXer Base, 200mm
Deragliatore posteriore	SRAM GX DH, 7spd
Comandi	SRAM GX, 7spd
Pacco pignoni	SRAM PG720 DH, 11-25t
Catena	SRAM PC1110, 11spd
Guidacatena	E13 LG1+ Chainguide
Movimento centrale	SRAM DUB 83mm Threaded BB
Serie Sterzo	Cane Creek 50 IS41 Headset 1-1/8"
Pneumatico posteriore	Maxxis Minion DHR II 27.5"x2.5", 3C MaxxGrip, DH
Pneumatico anteriore	Maxxis Minion DHR II 29"x2.5", 3C MaxxGrip, DH -or- Maxxis Assegai 29"x2.5", 3C MaxxGrip, DH
Mozzo posteriore	Industry Nine 1/1, 20x110 Boost, 32h
Cerchio anteriore	Reserve 30\|HD AL 6069 OR Raceface ARC 30 HD
Mozzo posteriore	Industry Nine 1/1, 12x157, HG, 32h
Cerchio posteriore	Reserve 30\|HD AL 6069 OR Raceface ARC 30 HD
Freno anteriore	SRAM Maven Bronze
Guarnitura	SRAM Descendant DH, 165mm, 36t
Manubrio	OneUp Aluminum Bar
Attacco manubrio	OneUp Direct Mount Stem
Sella	Fizik Alpaca Gravita X5 Saddle
Reggisella	RaceFace Chester, 31.6
Manopole/Nastro	Burgtec Bartender Pro Grip

Telaio	Carbon CC MX 208mm Travel VPP™
Diametro ruote	MX/29"
Peso	35.6lbs / 16.15 kg
Ammortizzatore	Fox DHX2 Factory Coil
Forcella	FOX 40 Float Factory, Grip X2, 203mm
Deragliatore posteriore	SRAM X01 DH, 7spd
Comandi	SRAM X01 DH
Pacco pignoni	SRAM X01 DH, 7spd
Catena	SRAM PC1170, 11spd
Guidacatena	E13 LG1+ Chainguide
Movimento centrale	SRAM DUB 83mm Threaded BB
Serie Sterzo	Cane Creek 50 IS41 Headset 1-1/8"
Pneumatico posteriore	Maxxis Minion DHR II 27.5"x2.5", 3C MaxxGrip, DH
Pneumatico anteriore	Maxxis Minion DHR II 29"x2.5", 3C MaxxGrip, DH -or- Maxxis Assegai 29"x2.5", 3C MaxxGrip, DH
Mozzo posteriore	Industry Nine 1/1, 20x110 Boost, 32h
Cerchio anteriore	Reserve 30\|HD AL 6069 OR Raceface ARC 30 HD
Mozzo posteriore	Industry Nine 1/1, 12x157, XD, 32h
Cerchio posteriore	Reserve 30\|HD AL 6069 OR Raceface ARC 30 HD
Disco anteriore	SRAM HS2 220mm
Disco posteriore	SRAM HS2 200mm
Freni	SRAM Maven Silver
Guarnitura	SRAM X01 DH, DUB 83, 165mm, 36t
Manubrio	OneUp Aluminum Bar
Attacco manubrio	OneUp Direct Mount Stem
Sella	Fizik Alpaca Gravita X5 Saddle
Reggisella	Burgtec Aluminum Post, 31.6
Manopole/Nastro	Burgtec Bartender Pro Grip

Peso	9.73 lbs / 4.41 kg
Materiale	Carbon CC
Escursione	208mm
Diametro ruote	MX (S, M, L) 29 (XL)
Ammortizzatore	Fox DHX2 Factory Coil

Geometria

Shock Position High Mid Low

Tutte le unità sono espresse in millimetri o gradi.

	s	m	l	xl(29)
Reach short mid long	412-420-428	447-455-463	467-475-483	492-500-508
Stack	624	633	637	642
Head tube angle	63	63	63	63
Head Tube Length	100	110	115	120
Rear Center (Long/Mid/Short)	440-445-450	445-450-455	450-455-460	455-460-465
Front Center	785	825	847	874
BB Height	356	356	356	356
BB Drop Front	17	17	17	17
BB Drop Rear	-1	-1	-1	17
Wheelbase	1230	1275	1302	1334
Seat Tube Length	435	445	455	465
Seat Tube Angle	77.9	77.4	77.3	77
Standover Height	729	730	731	731

	s	m	l	xl
Reach short mid long	411-419-427	446-454-462	466-474-482	491-499-507
Stack	625	634	638	643
Head tube angle	62.9	62.9	62.9	62.9
Head Tube Length	100	110	115	120
Rear Center (Long/Mid/Short)	440-445-451	446-451-456	451-456-461	456-461-466
Front Center	785	825	847	874
BB Height	353	353	353	353
BB Drop Front	19	19	19	19
BB Drop Rear	1	1	1	19
Wheelbase	1231	1275	1303	1335
Seat Tube Length	435	445	455	465
Seat Tube Angle	77.8	77.3	77.2	76.9
Standover Height	726	728	729	729

	s	m	l	xl
Reach short mid long	409-417-425	444-452-460	464-472-480	489-497-505
Stack	626	635	639	644
Head tube angle	62.7	62.7	62.7	62.7
Head Tube Length	100	110	115	120
Rear Center (Long/Mid/Short)	440-445-452	446-451-456	451-456-461	456-461-466
Front Center	785	825	847	874
BB Height	351	351	351	351
BB Drop Front	21	21	21	21
BB Drop Rear	3	3	3	21
Wheelbase	1231	1276	1303	1335
Seat Tube Length	435	445	455	465
Seat Tube Angle	77.6	77.1	77	76.7
Standover Height	724	726	726	726

Guida alle taglie

Small

154cm 5'1" - 167cm 5'6" Reach: 412-425mm

Medium

165cm 5'5" - 175cm 5'9" Reach: 447-467mm

Large

172cm 5'8" - 185cm 6'1" Reach: 467-480mm

X-Large

182cm 6' - 195cm 6'5" Reach: 492-505mm

Exploded Diagrams

Pro Pack, V10.8

€104,95

Upper Link Kit, V10.8

€46,95

Lower Link Kit, V10.8

€91,95

Flip Chip Mid |V10.8

€9,95

Image 1

Label	Name	Blurb	Quantity	Torque	Part Number
A	Head Tube Badge	Clean frame surface, center on headtube	1		67-19217
B	M4x16 BHCS	Apply grease to threads	4	0.65 Nm	26-23102
C	Fork Bumper DS		1		30-25026
D	Fork Bumper NDS		1		30-25025
E	Shuttle Guard		1		30-22560
F	M4x12 BHCS	Apply grease to treads	4	0.65 Nm	26-18382
G	DT Protector		1		30-20093
H	Rear Fender		1		30-25335
I	M3x12 BHCS	Apply Loctite 242 to threads	4	0.1 Nm	26-15939
J	36.4 Seat Collar		1		34-20201

Image 2

Label	Name	Blurb	Quantity	Torque	Part Number
A	RAHS Upper Offset	Apply grease at frame interface	1		26-29286
B	RAHS Upper Neutral	Apply grease at frame interface	1		26-29288
C	RAHS Lower Offset	Apply grease at frame interface	1		26-29285
D	RAHS Lower Neutral	Apply grease at frame interface	1		26-29287
E	M4x85 SHCS	Use for size small frame	1	4.5 Nm	26-29298
F	M4x95 SHCS	Use for size medium frame	1	4.5 Nm	26-29297
G	M4x100 SHCS	Use for size large frame	1	4.5 Nm	26-29296
H	M4x105 SHCS	Use for size xlarge frame	1	4.5 Nm	26-29295

Image 3

Label	Name	Blurb	Quantity	Torque	Part Number
A	M8x50 Shock Bolt	Apply loctite 242 to threads	1	22 Nm	26-21231
B	M8x22 Lowhead SHCS	Apply Loctite 242 to threads	4	16 Nm	26-27009
C	V10 Outer Bearing Washer	Apply grease to inner surface	4		26-12682
D	M8x45 Shock Bolt	Apply Loctite 242 to threads	1	20 Nm	26-22461
E	Flip Chip Neutral DS	Apply grease to surface	1		26-27123
F	Flip Chip Offset NDS	Apply grease to surface	1		26-17065
G	Flip Chip Offset DS	Apply grease to surface	1		26-17064
H	Flip Chip Neutral NDS	Apply grease to surface	1		26-27122
I	Pivot axle M15x68.5	Apply Loctite 242 to threads only, apply grease to shaft only	1	20 Nm	08-16291
J	M6 Tapered Washer	Apply grease to surface	2		26-15633
K	M6 Washer		2		26-11817
L	M6x20 SHCS	Apply Loctite 242 to threads	2	9 Nm	26-15947
M	Pivot Axle M15x72	Apply Loctite 242 to threads only, apply grease to shaft only	1	20 Nm	08-20879
N	Cable loop FT NDS		1		26-25329
O	Cable loop SA NDS		1		26-25331
P	M3x12 BHCS	Apply Loctite 242 to threads	3	0.1 Nm	26-15939

Image 4

Label	Name	Blurb	Quantity	Torque	Part Number
A	CS Protector		1		30-26670
B	RD Hanger Bolt	Apply Loctite 242 to threads	1	12 Nm	26-15634
C	V10 RD Hanger Short		1		23-20089
D	V10 RD Hanger Neutral		1		23-24890
E	V10 RD Hanger Long		1		23-20090
F	M4x4 Set Screw	Apply Loctite 242 to threads	1	1 Nm	26-11927
G	V10 NDS DO chip offset		1		26-20087
H	V10 NDS DO Chip Neutral		1		23-24889
I	V10 Rear axle 12x182	Apply grease to shaft and threads	1	12-15 Nm	08-24951
J	V10 Brake adapter 200		1		26-24963
K	V10 Brake adapter 220		1		26-24962
L	M6x20 SHCS	Apply Loctite 242 to threads	2	9 Nm	26-15947
M	M6 Washer		2		26-11817
N	Cable loop FT DS		1		26-25330
O	Cable loop SA DS		1		26-25332
P	M3x12 BHCS	Apply Loctite 242 to threads	4	0.1 Nm	26-15939
Q	Seatstay Protector		1		30-21453

Image 5

Label	Name	Blurb	Quantity	Part Number
A	Upper Link		1	29-26982
B	6900-2RS Bearing		4	11-12681
C	M10x3 Washer	Apply grease to inner surface	4	26-15533

Image 6

Label	Name	Blurb	Quantity	Torque	Part Number
A	Lower Link		1		29-26981
B	6902-1ZR Bearing		4		11-17708
C	Bearing Dust Shield	Apply grease to inner surface	4		26-11612
D	15x28 Bearing spacer		1		26-19126
E	15x32 Bearing Spacer	Apply grease to inner surface	1		26-20880
F	M5x5 Set Screw	Apply Loctite 242 to threads, titghten until flush	1	0.5 Nm	26-15532
G	M6 Grease Fitting		1	9 Nm	26-12678

Manuals & Files

Se desideri ulteriori informazioni sulla tua bicicletta, consulta il nostro Santa Cruz Bicycles Owner's Manual

FAQs

We designed the V10.8 with a 3-position adjustment at the headtube, lower link, and chainstay. We think the bike feels most neutral in the middle position for all three, and therefore is a good place to start.

Frames and complete bikes include everything you need to adjust the geometry:
Headset cups: +/- 8mm, 0mm
Dropouts: Short, Mid, Long
Lower link chips: Hi/Lo, Mid
Brake adaptor: 220mm, 200mm

No, the frames are specific to each wheelsize, they cannot be converted. Small, Medium, Large all come with MX wheels, while the XL comes with 29" wheels

The V10 comes with +/-8mm offset cups and with centered cups. They are installed in the frame by hand and can be easily adjusted. They accept a standard 1 1/8" IS41 integrated headset.

The V10 uses standard ISCG-05 tabs and should work with most guides that use that standard. E13 LG1 comes stock on the complete bikes, we've also had good experiences with the MRP G5 and SXG. If you're looking for a minimalist-style guide, the OneUp Bashguide is a good choice.

The V10.8 uses a 157x12 rear hub

The V10 has an 83mm threaded bottom bracket and is designed for DH cranks with a 56-57mm chainline

We use 52mm offset forks on our complete bikes, and find that to offer neutral, intuitive handling. That would be our recommendation to start with.

The V10.8 uses a 250x75 shock with 8x30 hardware on both ends

The leverage curve was designed and optimized for a coil shock, but DH-oriented
air shocks can also work. The Fox Float X2 and Vivid Air shocks fit, as long as the
air valve is oriented correctly. Unfortunately, the Rockshox Super Deluxe AIR shock
does not fit, due to interference with the rebound knob. Rockshox coil shocks fit
no problem.

Cart