Close X

FACTORY SALE

Limited time only. Subject to availability.
heckler 3 hero 1

Overview

Model Version:3
Production Start:2000
Production End:2001
Suspension/Pivot System:Single Pivot
Material:Aluminum - 6000 series
Rear Wheel Travel:100mm
Size Range:S,M,L,XL

Frame Specs

Compatible Forks:80mm to 120mm total travel - 120mm travel max
Headtube/Headset:1-1/8" Straight - External. S.H.I.S EC34/28.6 EC34/30
Seat Post:27.2mm - Minimum insertion 100mm
Front Derailleur:31.8mm Top Pull/Top Swing (Low Clamp)
BB Shell Width:68mm - Threaded - ISO
Chainline Spec:50mm
Recommended Max Tire Size:2.2 - may vary by tire and rim model
Brakes:Rim Brake and ISO Disc Brake Mounts
Max Brake Rotor Size:160mm
Rear Hub:135mm x 10mm (QR style)
Seatpost Clamp:31.8mm

Shock Specs

Rear Shock Eye-to-Eye:7.875"
Stroke:2.0"
Mounting Bushing Width Front:22mm
Mounting Bushing Width Rear:41mm
Mounting Bolt Diameter Front:8mm
Mounting Bolt Diameter Rear:8mm
Leverage Ratio:2:1
Rear Shock Setup:Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it.
The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag is 8-13mm at the shock shaft - This equates to approximately 15-25% of the total rear wheel travel.

Torque Specs

FastenerDescriptionPrepTorqueDownload
Main Pivot Aluminum hex nuts Loctitie 24280 inch lbs-
Front Shock Mounting Bolts Socket Head Cap ScrewLoctitie 24240 inch lbs-
Rear Shock Mounting BoltSocket Head Cap ScrewNylock nut80 inch lbs-
Main Pivot Bearing ClampSocket Head Cap ScrewLoctitie 24240 inch lbs-
Brake Plate mounting bolts Socket Head Cap ScrewGrease20 inch lbs-
heckler 3 geometry