blur 1 classic hero 1
blur 1 classic detail 1
blur 1 classic detail 2


Model Version:1 (Classic)
Production Start:2002
Production End:2005
Suspension/Pivot System:VPP - Virtual Pivot Point
Material:Aluminum - 6000 series
Rear Wheel Travel:115mm
Size Range:S,M,L,XL

Frame Specs

Compatible Forks:80mm to 100mm total travel - 100mm travel max
Headtube/Headset:1-1/8" Straight - External. S.H.I.S EC34/28.6 EC34/30
Seat Post:30.9mm - Minimum insertion 100mm
Front Derailleur:34.9mm Top Pull/Top Swing (Low Clamp)
BB Shell Width:68mm - Threaded - ISO
Chainline Spec:50mm
Recommended Max Tire Size:2.1 - may vary by tire and rim model
Brakes:Rim Brake and ISO Disc Brake Mounts
Rear Hub:135mm x 10mm (QR style)
Seatpost Clamp:34.9mm

Shock Specs

Rear Shock Eye-to-Eye:7.875” / 200mm
Stroke:2.0" / 50mm
Mounting Bushing Width Front:22mm
Mounting Bushing Width Rear:18mm
Mounting Bolt Diameter Front:8mm
Mounting Bolt Diameter Rear:3/8” (9.53mm)
Leverage Ratio:* 2.3 : 1 - *Note: All VPP leverage ratios vary throughout the travel, so there is not a constant linear ratio. This is the average
Rear Shock Setup:Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have.Contact the rear shock manufacturer for correct manual if you do not have it.The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag for this model is 10-15mm at the shock shaft. This equates to approximately 20-30% of the total rear wheel travel. Less sag = a firmer suspension feel.

Torque Specs

Custom M8 X 1.25Loctite 24280 inch lbs-
M5 X .8 X 8 allen head cap screws with washersGrease60 inch lbs-
M6 X 1 X 8 allen head cap screwLoctite 24270 inch lbs-
M5 X .8 X 6 allen head cap screws with washersLoctite 24260 inch lbs-
M8 X 1.25 X14 allen head cap screwLoctite 24260 inch lbs-

Replacement Parts

Propack Part Number:04-05005
Bearings-Only Part Number:04-05037
Dropout/Derailleur Hanger:04-05021
Upper Link:04-05053
QR Seatpost Collar:34-15543
Bearing Press and Removal Tool:10-05032
blur 1 classic geometry