Bullit
A DOWNHILL BIKE WITH A BUILT-IN CHAIRLIFT
If you feel the pull of gravity riding but want an extra push to get to the top, the Bullit is for you. Specifically designed to excel on the toughest terrain, it features an electric motor to get you to the drop-in of the wildest trails. The Bullit is the closest you can get to owning both a downhill bike and a chairlift.

WHEN GRAVITY CALLS
The Bullit is a no-limits ebike. With DH-derived geometry, huge travel, and rugged components, it's made for the wildest trails that would typically require a downhill bike.

WHAT GOES UP, LOVES COMING DOWN
When you seek out the roughest and most challenging trails, the Bullit will be your trusty sidekick. And when the route there takes you into rarefied air, having the power of a motor means you can save your best for the ride down.
Bullit X0 AXS RSV
High-Tech, High-Performance und das Beste vom Besten. CC Carbonrahmen, SRAM X0 AXS Transmission Antrieb, das neueste FOX Float Factory Fahrwerk und Carbon Reserve HD/DH Felgen auf DT Swiss Naben.
Bullit GX AXS
Erstklassige Performance. FOX Float Performance Elite Fahrwerk vorne und hinten, elektronischer SRAM GX Transmission Antrieb und leistungsstarke SRAM Maven Bremsen.
Bullit 90
Gute Upgrades für einen guten Preis. Reserve AL Laufräder, SRAM Maven Bremsen und OneUp Sattelstütze. FOX Float Performance-Fahrwerk und SRAM 90 Transmission-Antrieb.
Bullit 70
Basismodell mit hochwertigen Komponenten - der gleiche Bosch-Motor, die gleichen Maxxis-Reifen und große Bremsscheiben wie bei allen Bullit-Modellen. Hochwertiges Fahrwerk, mit wenigen Einstellmöglichkeiten.
Design Details
Bullit
Größe & Geometrie
Wenn Du zwischen zwei Rahmengrößen liegst, empfehlen wir, dass Du beide Optionen testest. Als Anhaltspunkt kannst Du die Reach- und Stack-Werte mit Deinem aktuellen Bike oder anderen bekannten Bikes vergleichen, auf denen Du Dich wohl fühlst. Wenn keine Testfahrt möglich ist, kannst Du Dich auch an den folgenden Tipps orientieren:
s | m | l | xl | xxl | |
---|---|---|---|---|---|
Reach (Hi/Lo) | 435/432 | 460/457 | 480/477 | 500/497 | 525/522 |
Stack (Hi/Lo) | 622/625 | 631/635 | 640/643 | 654/656 | 670/674 |
C. Lenkwinkel (Hi/Lo) | 63.6/63.3 | 63.6/63.3 | 63.6/63.3 | 63.6/63.3 | 63.6/63.3 |
Steuerrohrlänge | 100 | 110 | 120 | 135 | 155 |
Hinterbaulänge | 440 | 443 | 446 | 449 | 452 |
Front Center | 780 | 809 | 834 | 860 | 894 |
H. Tretlagerhöhe (Hi/Lo) | 346/342 | 346/342 | 346/342 | 346/342 | 346/342 |
BB Drop Front (Hi/Lo) | 27/31 | 27/31 | 27/31 | 27/31 | 27/31 |
BB Drop Rear (Hi/Lo) | 9/13 | 9/13 | 9/13 | 9/13 | 9/13 |
Radstand | 1220 | 1252 | 1280 | 1309 | 1346 |
Oberrohrlänge | 571 | 596 | 617 | 640 | 670 |
Sitzrohrlänge | 380 | 400 | 420 | 460 | 500 |
D. Sitzwinkel (Hi/Lo) | 78.6/78.3 | 78.7/78.4 | 78.7/78.4 | 78.7/78.4 | 78.6/78.3 |
J. Überstandshöhe (Hi/Lo) | 745/740 | 739/735 | 738/733 | 738/733 | 735/730 |
Bullit
Setup & Support
Egal, ob Du stolzer Besitzer eines Bullit bist oder Dich einfach nur für alle Details interessierst - hier wirst Du fündig.

label | name | quantity | part_number | blurb | torque |
---|---|---|---|---|---|
A | Head Tube Badge | 1 | 20-27756 | Clean frame surface, center on headtube | |
B | M5x10 BHCS | 4 | 26-27915 | Apply Loctite 242 to threads | 9 Nm |
C | Shuttle guard | 1 | 30-27825 | Line up with battery screws | |
D | Bosch DU Performance CX | 1 | 72-25239 | Bosch part number EB11.100.00E | |
E | M4x16 BHCS | 3 | 26-23102 | Apply grease to threads | 0.65 Nm |
F | DU Protector | 1 | 30-27495 | ||
G | M6x10 BHCS | 2 | 26-21224 | Apply loctite 242 to threads | 3 Nm |
H | Bosch DU mount nut | 2 | 26-27862 | Bosch part number EB11.200.03C | |
I | M8x7 Flip Chip | 1 | 26-27480 | Apply grease to outside surface | |
J | 36.4 Seat Collar | 1 | 34-20201 | ||
K | M4x26 Bosch Screw | 1 | 26-28150 | ||
L | Bosch TT System Controller | 1 | 72-25240 | Bosch part number EB13.100.000 | |
M | Bosch TT adapter | 1 | 26-27857 | Bosch part number EB13.200.0AE |

label | name | quantity | torque | part_number | blurb |
---|---|---|---|---|---|
A | M5x5 Set Screw | 2 | 0.5 Nm | 26-15532 | Apply Loctite 242 to threads, titghten until flush |
B | Water Bottle Screw | 2 | 26-21360 | ||
C | Pivot Axle M15x91 | 1 | 20 Nm | 08-22343 | Apply Loctite 242 to threads only, apply grease to shaft only |
D | M6 Tapered Washer | 2 | 26-15633 | Apply grease to surface | |
E | M6 Washer | 2 | 26-11817 | ||
F | M6x20 SHCS | 2 | 9 Nm | 26-15947 | Apply Loctite 242 to threads |
G | M8x7 Flip Chip | 1 | 26-27480 | Apply grease to outside surface | |
H | M8x45 Lowhead SHCS | 1 | 15.6 Nm | 26-20091 | Apply Loctite 242 to threads |
I | Bosch charge socket holder | 1 | 26-27867 | Bosch part number EB12.120.01A | |
J | Bosch MCx14 Screw | 2 | 26-27869 | Bosch part number F04N.002.663 | |
K | Bosch COB O-ring | 1 | 26-27868 | Bosch part number EB12.120.019 | |
L | Bosch charge socket | 1 | 72-25237 | Bosch part number EB12.120.048 | |
M | Bosch charger port cover | 1 | 26-27866 | Bosch part number EB12.120.01B | |
N | Bosch DU Insert Sleeve | 1 | 26-29334 | Bosch part number EB11.200.0GK | |
O | Bosch DU mount bolt front | 1 | 30 Nm | 26-27864 | Bosch part number EB11.200.12M |
P | Bosch DU mount bolt rear | 1 | 30 Nm | 26-27865 | Bosch part number EB11.200.12H |
Q | Pivot axle M15x80.5 | 1 | 20 Nm | 08-16292 | Apply Loctite 242 to threads only, apply grease to shaft only |
R | M4x8 BHCS | 2 | 0.65 Nm | 26-21249 | Apply grease to threads |
S | Fender | 1 | 30-27475 | ||
T | M10x10 trunnion screw | 2 | 16 Nm | 26-27481 | Apply Loctite 242 to threads only, apply grease to shaft only |
U | 6900-2RS Bearing | 2 | 11-12681 | ||
V | M10x3 Washer | 2 | 26-15533 | Apply grease to inner surface | |
W | M10x20 bolt | 2 | 16 Nm | 26-27484 | Apply Loctite 242 to threads |
X | 6902-2RS Max Bearing | 2 | 11-12218 | ||
Y | Washer | 2 | 26-27483 | Apply grease to inner surface | |
Z | M10x2.6 Flip Chip | 2 | 26-27482 | Apply grease to outside surface |

label | name | quantity | part_number | blurb | torque |
---|---|---|---|---|---|
A | Rear axle 12x173.7 | 1 | 08-22209 | Apply grease to shaft and threads | |
B | SCB UDH | 1 | 23-23491 | Interchangeable with Sram UDH | |
C | SCB UDH screw | 1 | 26-23492 | Reverse thread | 20 Nm |
D | M10x26 Bolt | 2 | 26-27487 | Apply Loctite 242 to threads only, apply grease to shaft only | 16 Nm |
E | Dust Shield | 4 | 26-27488 | Apply grease to inner surface | |
F | 6802-2RS Bearing | 4 | 11-27485 | ||
G | Bearing spacer | 2 | 26-27489 | Apply grease to shaft | |
H | M10x6 Nut | 2 | 26-27486 | Apply grease to inner surface | |
I | Chanistay protector | 1 | 30-27476 | ||
J | M3x12 BHCS | 1 | 26-15939 | Apply Loctite 242 to threads | 0.1 Nm |
K | M4x10 FHCS | 2 | 26-22938 | Apply Loctite 242 to threads | 0.65 Nm |
L | OneUp chainguide | 1 | 19-22609 | ||
M | OneUp chainguide back plate | 1 | 26-27839 | ||
N | Cable Loop Guide | 1 | 30-27838 | ||
O | M3x6 | 2 | 26-22358 | Apply Loctite 242 to threads | 0.6 Nm |
P | M5x12 HHS | 1 | 26-22570 | Apply Loctite 242 to threads | 2 Nm |
Q | Seatstay Protector | 1 | 30-21453 |

label | name | quantity | part_number | torque | blurb |
---|---|---|---|---|---|
A | Battery mount rear PT600 | 1 | 26-27493 | ||
B | M4x10 SHCS | 8 | 26-28053 | 1.2 Nm | Apply Loctite 242 to threads |
C | Bosch H-Connector | 1 | 26-27870 | ||
D | Bosch battery PT600 | 1 | 78-25241 | Bosch part number EB12.100.04X (US/CA), EB12.100.04V (EU, OZ) | |
E | Battery mount front PT600 | 1 | 26-27494 |

label | name | quantity | part_number | blurb |
---|---|---|---|---|
A | Bearing Dust Shield | 4 | 26-11612 | Apply grease to inner surface |
B | 6902-2RS Max Bearing | 4 | 11-12218 | |
C | 15x48 Bearing spacer | 1 | 26-17707 | |
D | 15x40.25 Bearing Spacer | 1 | 26-17013 | |
E | Cable loop FT NDS | 1 | 26-25329 | |
F | M3x12 BHCS | 1 | 26-15939 | Apply Loctite 242 to threads |

Frame Size | Flip Chip | Setup Key | Setup Cog | 32T | 34T | 36T |
---|---|---|---|---|---|---|
S | High | A | 7 | 116 | 116 | 118 |
M | High | B | 7 | 116 | 118 | 120 |
L | High | A | 7 | 118 | 120 | 120 |
XL | High | A | 7 | 118 | 120 | 120 |
XXL | High | A | 7 | 118 | 120 | 120 |
S | Low | A | 7 | 116 | 118 | 118 |
M | Low | A | 7 | 116 | 118 | 118 |
L | Low | A | 7 | 118 | 120 | 120 |
XL | Low | A | 7 | 118 | 120 | 120 |
XXL | Low | A | 7 | 118 | 120 | 120 |
Alle Details
Sizing and support for the Bullit.

Geometrie& Größe

Setup& Support
Also Consider...

LOOKING FOR SOMETHING A LITTLE LIGHTER?
See the Heckler SL