Santa Cruz Bicycles - Nomad Mountain Bike - Sand
Santa Cruz Bicycles - Nomad Mountain Bike - Ink
Gloss Tan & Black
Gloss Ink & Gold

シンジケートのスピードに対応する操作性

Nomad はエンデューロレースにおいてコースの一歩先を常に捉えられるように設計されています。

シンジケートの世界最速のスピードに対しても65度のヘッドアングルが V10 と同じ操作性をもたらし、V10 の特徴でもある上部との繋がりと Nomad 独自の特性である下部との繋がりの両方を、VPP™方式の165mmトラベルが実現させました。

チェーンステイをコンパクトにし、広めのコクピットと平均よりも角度の深いサドルの角度は急勾配を駆け抜けるライダーに驚くほど効果的なペダリングポジションを可能にします。

細いカーボン繊維のチューブからなる内部ケーブルがフレームの隅々まで張り巡らされており、ストレスを感じさせない完璧なルート確保を保証します。

フレーム本体価格: ¥454,000 (Monarch Plus) / ¥493,000 (Vivid Air)

グラビディーバイクの気分じゃない? だったら Bronson はどうでしょう?

もっとダウンヒルに特化したフレームをお探しですか? だったら V10 しかありません!

Key Features:

  • Available in: Aluminum, Carbon C & Carbon CC More Info
  • Wheel size: 27.5"
  • Rear travel: 170mm
  • Designed for: Trail & Freeride

Build & Price

Up Close

ジオメトリとサイズ

Rollover table below to highlight frame dimensions.

High

XSSMLXL
Rider4'8"+1.42m+5'0"+1.52m+5'5"+1.65m+5'9"+1.75m+6'1"+1.85m+
Aリーチ390mm15.35"420mm16.54"440mm17.32"460mm18.11"490mm19.29"
Bスタック584mm22.99"593mm23.35"602mm23.7"611mm24.06"620mm24.41"
Cヘッドチューブアングル65°65°65°65°65°65°65°65°65°65°
Dヘッドチューブの長さ375mm14.76"390mm15.35"420mm16.54"450mm17.72"480mm18.9"
EFront Center704mm27.72"738mm29.06"762mm30"787mm30.98"821mm32.32"
FBBの高さ344mm13.54"344mm13.54"344mm13.54"344mm13.54"344mm13.54"
GBB Drop10mm0.39"10mm0.39"10mm0.39"10mm0.39"10mm0.39"
Hホイールベース1134mm44.65"1168mm45.98"1192mm46.93"1217mm47.91"1251mm49.25"
Iチェーンステイ長430mm16.93"430mm16.93"430mm16.93"430mm16.93"430mm16.93"
Jヘッドチューブの長さ90mm3.54"100mm3.94"110mm4.33"120mm4.72"130mm5.12"
Kトップチューブの長さ540mm21.26"573mm22.56"596mm23.46"619mm24.37"653mm25.71"
Lヘッドチューブのアングル74.5°74.5°74.5°74.5°74.5°74.5°74.5°74.5°74.5°74.5°
Mスタンドオーバー高さ710mm27.95"712mm28.03"728mm28.66"726mm28.58"724mm28.5"
NEye to Eye Length
Geometry Illustration LayerGeometry Illustration LayerGeometry Illustration LayerGeometry Illustration LayerGeometry Illustration LayerGeometry Illustration LayerGeometry Illustration LayerGeometry Illustration LayerGeometry Illustration LayerGeometry Illustration LayerGeometry Illustration LayerGeometry Illustration LayerGeometry Illustration LayerGeometry Illustration LayerGeometry Illustration Layer

Tech Support

The geometry chart shows two settings- how do I adjust that?

There's a "flip chip" on the lower link where the shock mounts.  Just remove the lower shock bolt and flip the chips to the setting you desire

What kind of rear brake mount does it use?

The Nomad 4 uses a 180mm post mount.  You cannot run a smaller rotor than that.  The Lyrik and Yari that we spec are also 180mm post mount.

What size fork is the Nomad designed for?

We designed it around a 170mm fork, and this will be ideal for the balance of the bike.  A 180mm fork would work as well, if you're looking for an even more gravity-oriented bike.

Can I mount a chainguide to my bike?

Yes, this bike is equipped with ISCG-05 tabs for easy chainguide mounting.  Most chainguides on the market that are made for this standard should work.

I see you offer some models with a choice of coil shock or air shock- which should I get?

There is a difference in feel between the two, but neither is better than the other- just different.  The air shock is more progressive than the coil, which allows for a slightly softer setup without worrying about bottoming-out.  This will generally offer a smoother ride, but one that can still be ridden very aggressively and not struggle.  
The coil has a slightly more linear feel/ less bottom-out resistance, which encourages a firmer overall setup.  This offers the maximum mid-stroke support for berms/park riding/ pushing into turns.  If you like a more responsive/firmer feel, you will probably prefer the coil.  If you set the air shock up to offer a similar feel in the mid-stroke, you may struggle to achieve full travel.  These aren't huge differences, but they are enough that we wanted to offer both.  Obviously, the air shock offers the advantages of being lighter and easier to tune, so this will be the right choice for the majority of riders.   

We know metric-sized springs are a bit hard to come by at the moment, so if you're looking to swap out the spring on your coil shock, a spring sized for an 8.2x2.5 shock will work on the 230x60 shock spec'd on the Nomad. 

Should I grease the headset cups when I install them?

Yes, we recommend this. Do not use the Carbon Assembly Compound on the headset, as it will make it more difficult to remove from the frame.

What kind of headset does the aluminum version of this bike use?

The aluminum version of this bike uses integrated headset cups. The the upper up is 41mm and the lower cup is 52mm. The SHIS name is IS 41/28.6 IS 52/40.

What kind of headset does this bike use?

This bike uses integrated headset cups. The upper up is 41mm and the lower cup is 52mm. The SHIS name is IS 41/28.6 IS 52/40.

What size seatpost does the Nomad use?

31.6mm.  We spec/recommend the Reverb without the Connectamajig to maximize the amount of seatpost insertion available.