Vala XT Di2 RSV
Allestimenti & Specifiche
*Veuillez noter : nous faisons tout notre possible pour garantir l'exactitude des composants listés, mais malgré nos efforts, ils peuvent être amenés à changer sans préavis
| Telaio | |
|---|---|
|
Materiale |
|
|
Caratteristiche |
|
|
Telaio |
|
|
Escursione |
|
|
Peso |
|
|
Diametro ruote |
|
| Sospensione | |
|
Forcella |
|
|
Ammortizzatore |
|
|
Remote |
|
| Guarnitura | |
|
Movimento centrale |
|
|
Pacco pignoni |
|
|
Catena |
|
|
Guidacatena |
|
|
Lunghezza pedivelle |
|
|
Guarnitura |
|
|
Deragliatore anteriore |
|
|
Comandi |
|
|
Deragliatore posteriore |
|
|
Comandi |
|
|
Comandi |
|
| Freni | |
|
Freni |
|
|
Freno anteriore |
|
|
Disco anteriore |
|
|
Freno posteriore |
|
|
Disco posteriore |
|
|
Dischi |
|
| Cockpit | |
|
Larghezza manubrio |
|
|
Lunghezza del reggisella |
|
|
Manopole/Nastro |
|
|
Manubrio |
|
|
Serie Sterzo |
|
|
Sella |
|
|
Reggisella |
|
|
Attacco manubrio |
|
|
Lunghezza attacco manubrio |
|
| Ruote | |
|
Cerchio anteriore |
|
|
Mozzo posteriore |
|
|
Pneumatico anteriore |
|
|
Cerchio posteriore |
|
|
Mozzo posteriore |
|
|
Pneumatico posteriore |
|
|
Valvole |
|
|
Cerchi |
|
| Vélo électrique | |
|
Batteria |
|
|
Unité motrice |
|
|
Caricabatteria |
|
|
Range Extender |
|
| Specifiche | |
|
Scatola movimento centrale |
|
|
Attacco freno posteriore |
|
|
ISCG Standard |
|
|
Linea catena |
|
|
Forcellino |
|
|
Downtube Storage |
|
|
Interasse ammortizzatore |
|
|
Axle to Crown Forcella |
|
|
Compatibilità della forcella |
|
|
Offset della forcella |
|
|
Attacco deragliatore anteriore |
|
|
Serie sterzo |
|
|
Massima corona consentita |
|
|
Diametro massimo disco |
|
|
Larghezza massima pneumatico May vary according to tire and rim model |
|
|
Front Spacing |
|
|
Int. mozzo posteriore |
|
|
Escursione posteriore |
|
|
Sag consigliato |
|
|
Liquido |
|
|
Diametro clamp |
|
|
Diametro reggisella |
|
|
Dimensioni boccola anteriore dell'ammo |
|
|
Dimensioni boccola posteriore dell'ammo |
|
|
Shock Mounting Hardware inferiore |
|
|
Shock Mounting Hardware superiore |
|
|
Corsa dell'ammortizzatore |
|
|
Sistema di sospensione |
|
|
UDH |
|
|
Attacco borraccia |
Vala XT Di2 RSV
Taglie e Geometrie
Se sei a cavallo tra due misure consigliate, la cosa migliore sarebbe quella di provarle entrambe. Ma la prima cosa da fare è di controllare le misure di stack/reach della tua bici attuale e confrontale con quelle del nuovo modello che stai valutando. Questo ti permette di avere un'idea della misura che ti si avvicina di più. Se non hai la possibilità di provare la bici, considera quanto segue.
| S | M | L | XL | XXL | |
|---|---|---|---|---|---|
| Reach | 435 | 460 | 480 | 500 | 525 |
| Stack | 623 | 632 | 641 | 655 | 668 |
| Head tube angle | 64.2° | 64.2° | 64.2° | 64.2° | 64.2° |
| Longueur du tube de direction | 110 | 120 | 130 | 145 | 160 |
| Longueur des bases | 439 | 440 | 443 | 446 | 450 |
| Front Center | 771 | 800 | 825 | 851 | 883 |
| Hauteur du boitier | 344 | 344 | 344 | 344 | 344 |
| BB Drop Front | 28 | 28 | 28 | 28 | 28 |
| BB Drop Rear | 11 | 11 | 11 | 11 | 11 |
| Empattement | 1210 | 1240 | 1268 | 1297 | 1333 |
| Longueur de tube supérieur | 573 | 601 | 622 | 645 | 673 |
| Longueur du tube de selle | 380 | 400 | 420 | 460 | 500 |
| Angle du tube de selle | 77.5° | 77.5° | 77.5° | 77.5° | 77.5° |
| Standover Height | 741 | 735 | 734 | 734 | 728 |
| S | M | L | XL | XXL | |
|---|---|---|---|---|---|
| Reach | 432 | 456 | 477 | 497 | 522 |
| Stack | 625 | 635 | 643 | 657 | 670 |
| Head tube angle | 63.9° | 63.9° | 63.9° | 63.9° | 63.9° |
| Longueur du tube de direction | 110 | 120 | 130 | 145 | 160 |
| Longueur des bases | 439 | 440 | 443 | 446 | 450 |
| Front Center | 771 | 800 | 825 | 851 | 883 |
| Hauteur du boitier | 340 | 340 | 340 | 340 | 340 |
| BB Drop Front | 32 | 32 | 32 | 32 | 32 |
| BB Drop Rear | 15 | 15 | 15 | 15 | 15 |
| Empattement | 1210 | 1240 | 1268 | 1297 | 1333 |
| Longueur de tube supérieur | 573 | 601 | 622 | 645 | 673 |
| Longueur du tube de selle | 380 | 400 | 420 | 460 | 500 |
| Angle du tube de selle | 77.2° | 77.2° | 77.2° | 77.2° | 77.2° |
| Standover Height | 741 | 735 | 734 | 734 | 728 |
| S | M | L | XL | |
|---|---|---|---|---|
| Reach | 433 | 458 | 478 | 498 |
| Stack | 625 | 634 | 643 | 656 |
| Head tube angle | 64.1° | 64.1° | 64.1° | 64.1° |
| Longueur du tube de direction | 110 | 120 | 130 | 145 |
| Longueur des bases | 440 | 440 | 445 | 445 |
| Front Center | 771 | 800 | 825 | 851 |
| Hauteur du boitier | 342 | 342 | 342 | 342 |
| BB Drop Front | 30 | 30 | 30 | 30 |
| BB Drop Rear | 13 | 13 | 13 | 13 |
| Empattement | 1211 | 1241 | 1270 | 1297 |
| Longueur de tube supérieur | 578 | 606 | 628 | 652 |
| Longueur du tube de selle | 380 | 400 | 420 | 460 |
| Angle du tube de selle | 76.9° | 76.9° | 76.8° | 76.8° |
| Standover Height | 744 | 745 | 729 | 732 |
Vala XT Di2 RSV
Configurazione & assistenza
Che tu sia l'orgoglioso proprietario di una Vala o che tu stia semplicemente approfondendo i dettagli, qui troverai tutto quello che stai cercando.
| Peso del Rider (lbs) | Peso del Rider (kg) | Pressione (psi) | Rebound (L/H da chiuso) | Compressione (L/H dal chiuso) |
|---|---|---|---|---|
| 100 | 45 | 57 | 11/8 | 8/5 |
| 120 | 54 | 64 | 10/8 | 8/5 |
| 140 | 64 | 72 | 9/8 | 8/5 |
| 160 | 73 | 81 | 8/7 | 8/5 |
| 180 | 82 | 90 | 7/6 | 6/4 |
| 200 | 91 | 98 | 6/5 | 6/4 |
| 220 | 100 | 107 | 4/3 | 6/4 |
| 240 | 109 | 114 | 2/1 | 6/4 |
| Peso del Rider (lbs) | Peso del Rider (kg) | Pressione (psi) | Sag | Rebound (da chiuso) | Compressione |
|---|---|---|---|---|---|
| 100 | 45 | 125 | 30%, 18mm | 8 | 5 |
| 120 | 54 | 145 | 30%, 18mm | 7 | 5 |
| 140 | 64 | 165 | 30%, 18mm | 7 | 5 |
| 160 | 73 | 180 | 30%, 18mm | 6 | 5 |
| 180 | 82 | 200 | 30%, 18mm | 5 | 5 |
| 200 | 91 | 220 | 30%, 18mm | 4 | 5 |
| 220 | 100 | 240 | 30%, 18mm | 4 | 5 |
| 240 | 109 | 255 | 30%, 18mm | 3 | 5 |
| 260 | 118 | 275 | 30%, 18mm | 3 | 5 |
Vala 1 C Small Parts
Compra parti di ricambio
| Label | Name | Blurb | Quantity | Torque | Part Number |
|---|---|---|---|---|---|
| A | Head Tube Badge | Clean frame surface, center on headtube | 1 | 20-27756 | |
| B | M5x10 BHCS | Apply Loctite 242 to threads | 4 | 9 Nm | 26-27915 |
| C | Shuttle guard | Line up with battery screws | 1 | 30-27825 | |
| D | Bosch DU Performance CX | Bosch part number EB11.100.00E | 1 | 72-25239 | |
| E | M4x16 BHCS | Apply grease to threads | 3 | 0.65 Nm | 26-23102 |
| F | DU protector | Use 30-27495 for size S & M | 1 | 30-27496 | |
| G | M6x10 BHCS | Apply loctite to threads | 2 | 3 Nm | 26-21224 |
| H | Bosch DU mount nut | Bosch part number EB11.200.03C | 2 | 26-27862 | |
| I | M8x7 Flip Chip | Apply grease to outside surface | 1 | 26-27479 | |
| J | 36.4 Seat Collar | 1 | 34-20201 | ||
| K | M4x26 Bosch Screw | 1 | 26-28150 | ||
| L | Bosch TT System Controller | Bosch part number EB13.100.000 | 1 | 72-25240 | |
| M | Bosch TT adapter | Bosch part number EB13.200.0AE | 1 | 26-27857 |
| Label | Name | Blurb | Quantity | Torque | Part Number |
|---|---|---|---|---|---|
| A | M5x5 Set Screw | Apply Loctite 242 to threads, titghten until flush | 2 | 0.5 Nm | 26-15532 |
| B | M5x16 Water Bottle screw | Apply grease to threads | 4 | 26-20124 | |
| C | Pivot Axle M15x91 | Apply Loctite 242 to threads only, apply grease to shaft only | 1 | 20 Nm | 08-22343 |
| D | M6 Tapered Washer | Apply grease to surface | 2 | 26-15633 | |
| E | M6 Washer | 2 | 26-11817 | ||
| F | M6x20 SHCS | Apply Loctite 242 to threads | 2 | 9 Nm | 26-15947 |
| G | M8x7 Flip Chip | Apply grease to outside surface | 1 | 26-27480 | |
| H | M8x45 Lowhead SHCS | Apply Loctite 242 to threads | 1 | 15.6 Nm | 26-20091 |
| I | Bosch charge socket holder | Bosch part number EB12.120.01A | 1 | 26-27867 | |
| J | Bosch MCx14 Screw | Bosch part number F04N.002.663 | 2 | 26-27869 | |
| K | Bosch COB O-ring | Bosch part number EB12.120.019 | 1 | 26-27868 | |
| L | Bosch charge socket | Bosch part number EB12.120.048 | 1 | 72-25237 | |
| M | Bosch charger port cover | Bosch part number EB12.120.01B | 1 | 26-27866 | |
| N | Bosch DU mount insert sleeve | Bosch part number EB11.200.0GK | 2 | 26-29334 | |
| O | Bosch DU mount bolt front | Bosch part number EB11.200.12M | 1 | 30 Nm | 26-27864 |
| P | Bosch DU mount bolt rear | Bosch part number EB11.200.12H | 1 | 30 Nm | 26-27865 |
| Q | Pivot axle M15x80.5 | Apply Loctite 242 to threads only, apply grease to shaft only | 1 | 20 Nm | 08-16292 |
| R | M4x12 BHCS | Apply grease to treads | 2 | 0.65 Nm | 26-18382 |
| S | Fender | 1 | 30-27475 | ||
| T | M10x10 trunnion screw | Apply Loctite 242 to threads only, apply grease to shaft only | 2 | 16 Nm | 26-27481 |
| U | 6900-2RS Bearing | 2 | 11-12681 | ||
| V | M10x3 Washer | Apply grease to inner surface | 2 | 26-15533 | |
| W | M10x20 bolt | Apply Loctite 242 to threads | 2 | 16 Nm | 26-27484 |
| X | 6902-2RS Max Bearing | 2 | 11-12218 | ||
| Y | Washer | Apply grease to inner surface | 2 | 26-27483 | |
| Z | M10x2.6 Flip Chip | Apply grease to outside surface | 2 | 26-27482 | |
| AA | Cable loop FT NDS | 1 | 26-25329 | ||
| BB | M3x12 BHCS | Apply Loctite 242 to threads | 1 | 0.1 Nm | 26-15939 |
| Label | Name | Blurb | Quantity | Torque | Part Number |
|---|---|---|---|---|---|
| A | Rear axle 12x173.7 | Apply grease to shaft and threads | 1 | 08-22209 | |
| B | SCB UDH | Interchangeable with Sram UDH | 1 | 23-23491 | |
| C | SCB UDH screw | Reverse thread | 1 | 20 Nm | 26-23492 |
| D | M10x26 Bolt | Apply Loctite 242 to threads only, apply grease to shaft only | 16 Nm | 26-27487 | |
| E | Dust Shield | Apply grease to inner surface | 2 | 26-27488 | |
| F | 6802-2RS Bearing | 11-27485 | |||
| G | Bearing spacer | Apply grease to shaft | 2 | 26-27489 | |
| H | M10x6 Nut | Apply grease to inner surface | 2 | 26-27486 | |
| I | Chanistay protector | 30-27476 | |||
| J | M3x12 BHCS | Apply Loctite 242 to threads | 0.1 Nm | 26-15939 | |
| K | M4x10 FHCS | Apply Loctite 242 to threads | 0.65 Nm | 26-22938 | |
| L | OneUp chainguide | 19-22609 | |||
| M | OneUp chainguide back plate | 26-27839 | |||
| N | Cable Loop Guide | 30-27838 | |||
| O | M3x6 | Apply Loctite 242 to threads | 0.6 Nm | 26-22358 | |
| P | M5x12 HHS | Apply Loctite 242 to threads | 2 Nm | 26-22570 | |
| Q | Seatstay Protector | 30-21453 |
| Label | Name | Blurb | Quantity | Torque | Part Number |
|---|---|---|---|---|---|
| A | Battery mount rear PT600 | 1 | 26-27493 | ||
| B | M4x10 SHCS | Apply Loctite 242 to threads | 4 | 1.2 Nm | 26-28053 |
| C | Bosch H-Connector | 1 | 26-27870 | ||
| D | Bosch battery PT600 | Bosch part number EB12.100.04X (US/CA), EB12.100.04V (EU, OZ) | 1 | 78-25241 | |
| E | Battery mount front PT600 | 1 | 26-27494 | ||
| F | Battery mount rear PT600 | 1 | 26-27912 |
| Label | Name | Blurb | Quantity | Torque | Part Number |
|---|---|---|---|---|---|
| A | M5x10 BHCS | Apply Loctite 242 to threads | 4 | 9 Nm | 26-27915 |
| B | Shuttle guard | Line up with battery screws | 1 | 30-27825 | |
| C | Bosch DU Performance CX | Bosch part number EB11.100.00E | 1 | 72-25239 | |
| D | DU Protector | 1 | 30-28663 | ||
| E | M4x16 BHCS | Apply grease to threads | 4 | 0.65 Nm | 26-23102 |
| F | M6x10 BHCS | Apply loctite 242 to threads | 2 | 3 Nm | 26-21224 |
| G | Bosch DU mount nut | Bosch part number EB11.200.03C | 2 | 26-27862 | |
| H | M5x16 Water Bottle screw | Apply grease to threads | 2 | 26-20124 | |
| I | 36.4 Seat Collar | 1 | 34-20201 | ||
| J | Bosch TT System Controller | Bosch part number EB13.100.000 | 1 | 72-25240 | |
| K | M4x12 BHCS | Apply grease to treads | 1 | 0.65 Nm | 26-18382 |
| Label | Name | Blurb | Quantity | Torque | Part Number |
|---|---|---|---|---|---|
| A | Water Bottle Screw | 2 | 26-21360 | ||
| B | M4x12 BHCS | Apply grease to treads | 2 | 0.65 Nm | 26-18382 |
| C | M5x5 Set Screw | Apply Loctite 242 to threads, titghten until flush | 2 | 0.5 Nm | 26-15532 |
| D | PowerMore wire clip | Use with Bosch range extender | 1 | 30-28124 | |
| E | M8x45 Lowhead SHCS | Apply Loctite 242 to threads | 1 | 22 Nm | 26-20091 |
| F | Bosch charge socket holder | Bosch part number EB12.120.01A | 1 | 26-27867 | |
| G | Bosch COB O-ring | Bosch part number EB12.120.019 | 1 | 26-27868 | |
| H | Bosch charge socket | Bosch part number EB12.120.048 | 1 | 72-25237 | |
| I | Bosch MCx14 Screw | Bosch part number F04N.002.663 | 2 | 26-27869 | |
| J | Bosch charger port cover | Bosch part number EB12.120.01B | 1 | 26-27866 | |
| K | Bosch DU screw wide V2 | Bosch part number EB11.200.15J | 1 | 30 Nm | 26-29606 |
| L | Bosch insert socket long V2 | Bosch part number EB11.200.15H | 1 | 26-29605 | |
| M | Cable loop FT NDS | 1 | 26-25329 | ||
| N | M3x8 BHCS | Apply Loctite 242 to threads | 1 | 0.5 Nm | 26-23284 |
| O | Bosch insert socket short V2 | Bosch part number EB11.200.12F | 1 | 26-29607 | |
| P | Bosch DU screw V2 | Bosch part number EB11.200.12G | 1 | 30 Nm | 26-29608 |
| Q | Fender | 1 | 30-27475 | ||
| R | M4x12 BHCS | Apply grease to treads | 2 | 0.65 Nm | 26-18382 |
| Label | Name | Blurb | Quantity | Torque | Part Number |
|---|---|---|---|---|---|
| A | Pivot Axle M15x91 | Apply Loctite 242 to threads only, apply grease to shaft only | 1 | 20 Nm | 08-22343 |
| B | M6 Tapered Washer | Apply grease to surface | 1 | 26-15633 | |
| C | M6 Washer | 1 | 26-11817 | ||
| D | M6x20 SHCS | Apply Loctite 242 to threads | 1 | 9 Nm | 26-15947 |
| E | M10x3 Washer | Apply grease to inner surface | 2 | 26-15533 | |
| F | 6900-2RS Bearing | 2 | 11-12681 | ||
| G | M10x10 trunnion screw | Apply Loctite 242 to threads only, apply grease to shaft only | 2 | 16 Nm | 26-27481 |
| H | SSE Reducer | Apply grease to inner surface | 2 | 26-28683 | |
| I | 6902-2RS Max Bearing | 2 | 11-12218 | ||
| J | M10x20 bolt | Apply Loctite 242 to threads | 2 | 16 Nm | 26-27484 |
| Label | Name | Blurb | Quantity | Torque | Part Number |
|---|---|---|---|---|---|
| A | Rear axle 12x173.7 | Apply grease to shaft and threads | 1 | 08-22209 | |
| B | SCB UDH | Interchangeable with Sram UDH | 1 | 23-23491 | |
| C | SCB UDH screw | Reverse thread | 1 | 20 Nm | 26-23492 |
| D | M10x26 Bolt | Apply Loctite 242 to threads only, apply grease to shaft only | 2 | 16 Nm | 26-27487 |
| E | Dust Shield | Apply grease to inner surface | 4 | 26-27488 | |
| F | 6802-2RS Bearing | 4 | 11-27485 | ||
| G | Bearing spacer | Apply grease to shaft | 2 | 26-27489 | |
| H | Chainstay Protector | 1 | 30-28664 | ||
| I | M3x8 BHCS | Apply Loctite 242 to threads | 1 | 0.5 Nm | 26-23284 |
| J | Cable Loop Guide | 1 | 30-27838 | ||
| K | OneUp chainguide back plate | 1 | 26-27839 | ||
| L | M4x10 FHCS | Apply Loctite 242 to threads | 2 | 0.65 Nm | 26-22938 |
| M | OneUp chainguide | 1 | 19-22609 | ||
| N | M5x12 HHS | Apply Loctite 242 to threads | 1 | 2 Nm | 26-22570 |
| O | M3x6 | Apply Loctite 242 to threads | 2 | 0.6 Nm | 26-22358 |
| P | Seatstay Protector | 1 | 30-21453 | ||
| Q | Hose Grommet | 1 | 26-19207 |
| Label | Name | Blurb | Quantity | Torque | Part Number |
|---|---|---|---|---|---|
| A | 6902-2RS Max Bearing | 4 | 11-12218 | ||
| B | Bearing Dust Shield | Apply grease to inner surface | 4 | 26-11612 | |
| C | 15x48 Bearing spacer | 1 | 26-17707 | ||
| D | Pivot Axle M15x91 | Apply Loctite 242 to threads only, apply grease to shaft only | 1 | 20 Nm | 08-22343 |
| E | 15x40.25 Bearing Spacer | 1 | 26-17013 | ||
| F | Pivot axle M15x80.5 | Apply Loctite 242 to threads only, apply grease to shaft only | 1 | 20 Nm | 08-16292 |
| G | M6 Tapered Washer | Apply grease to surface | 2 | 26-15633 | |
| H | M6 Washer | 2 | 26-11817 | ||
| I | M6x20 SHCS | Apply Loctite 242 to threads | 2 | 9 Nm | 26-15947 |
| Label | Name | Blurb | Quantity | Torque | Part Number |
|---|---|---|---|---|---|
| A | M4x10 SHCS | Apply Loctite 242 to threads | 8 | 1.2 Nm | 26-28053 |
| B | Battery mount front PT600 | 1 | 26-27494 | ||
| C | Bosch battery PT600 | Bosch part number EB12.100.04X (US/CA), EB12.100.04V (EU, OZ) | 1 | 78-25241 | |
| D | Cable Tray | 1 | 30-28682 | ||
| E | Bosch H-Connector | 1 | 26-27870 | ||
| F | Battery mount rear PT600 | 1 | 26-27912 | ||
| G | Battery Mount Rear PT600 Type 2 | 1 | 26-28681 |
| Frame Size | Flip Chip | Setup Key | Setup Cog | 32T | 34T | 36T |
|---|---|---|---|---|---|---|
| S | High | B | 7 | 116 | 118 | 118 |
| M | High | B | 7 | 116 | 118 | 118 |
| L | High | B | 7 | 118 | 118 | 120 |
| XL | High | B | 7 | 118 | 118 | 120 |
| XXL | High | B | 7 | 118 | 120 | 120 |
| S | Low | B | 7 | 116 | 118 | 118 |
| M | Low | B | 7 | 118 | 118 | 120 |
| L | Low | B | 7 | 118 | 118 | 120 |
| XL | Low | B | 7 | 118 | 120 | 120 |
| XXL | Low | B | 7 | 118 | 120 | 120 |
| S - AL | None | B | 7 | 118 | 118 | 120 |
| M - AL | None | B | 7 | 118 | 118 | 120 |
| L - AL | None | B | 7 | 118 | 118 | 120 |
| XL - AL | None | B | 7 | 118 | 118 | 120 |
Vala XT Di2 RSV
Accédez au Owners Club et bénéficiez d'une assistance personnalisée, accédez à des avantages, des opportunités et même des surprises ! Rejoignez le club gratuitement dès maintenant !
En savoir plusNous concevons les vélos Santa Cruz pour qu'ils soient durables et résistants, puis nous assurons leur suivi avec un service légendaire et une garantie de la plus haute qualité.
Santa Cruz Bicycles offre le remplacement gratuit des roulements du cadre à vie, pour le propriétaire d'origine.
The Vala is a full-power ebike that delivers precision and power. It’s made for riders looking for focused performance on the best trails. Perfectly balanced, refined suspension and the finest quality construction, as always.
Qualités remarquables
Explorez les qualités remarquables du Vala, qui font qu'il est si spécial !
Shimano XT Di2 Drivetrain
SRAM Maven Silver Brakes + 200mm Rotors
DT Swiss 350 DF Anti-Pedal Kickback Hub
Reserve HD30 Carbon Rims + Maxxis Tires
Fox 38 Float Factory Grip X2 Fork
Allez plus loin
Montageet composants
Géométries et tailles
Configurationet support technique
Autres montages
Vala 70
Modèle de base équipé du même type de composants de qualité que le reste de la gamme Vala, avec une transmission mécanique T-Type SRAM 70, un amortisseur FOX Float X, des jantes Reserve aluminium et des pneus Maxxis.
Vala 90
Une valeur sûre... Moyeux, jeu de direction et tige de selle optimisés. Un amortisseur FOX Float X, une transmission mécanique T-Type SRAM 90, des freins SRAM Maven, des jantes Reserve aluminium et des pneus Maxxis.
Vala AL 70
La nuova trasmissione meccanica SRAM, abbinata alle sospensioni RockShox ad alte prestazioni. Grandi dischi freno per una potenza frenante incomparabile e pneumatici Maxxis montati su ruote in alluminio Reserve con garanzia a vita.
Vala AL Deore
Modello base con affidabile trasmissione Shimano ed efficiente sospensione RockShox. I cerchi WTB con pneumatici Maxxis e il reggisella telescopico SDG completano il pacchetto.
Vala GX AXS
Des performances optimisées... Évolution vers une transmission électronique SRAM GX Eagle, des suspensions Fox Performance Elite et les puissants freins SRAM Maven
Vala GX AXS
Une porte d'entrée vers la haute technologie. Transmission électronique SRAM GX Eagle complète, freins SRAM Maven et roues aluminium.
Vala X0 AXS RSV
Technologies de pointe et performances exceptionnelles. Cadre carbone CC, suspensions Fox Factory, puissants freins SRAM Maven et les roues Reserve carbone devenues légendaires.
Vala X0 AXS RSV
Technologies de pointe et performances exceptionnelles. Cadre carbone CC, suspensions Fox Factory, puissants freins SRAM Maven et les roues Reserve carbone devenues légendaires.
Vala XT Di2 Lite RSV
Un montage orienté légèreté avec la transmission Shimano XT Di2 directement connectée à la batterie du système. La fourche Fox 36 Factory, les roues carbone Reserve 30|HD et le cockpit OneUp complètent le montage.
Vala XX AXS Lite RSV
Notre nouveau montage allégé en gardant un VTT électrique pleine puissance : transmission SRAM XX AXS, fourche Fox 36, et roues carbone Reserve 30|HD.
Vala XX AXS RSV
Montage remarquable qui ne laisse rien au hasard et s'équipe des meilleurs composants sur le marché.
