Bullit X0 AXS RSV
Allestimenti & Specifiche
*Veuillez noter : nous faisons tout notre possible pour garantir l'exactitude des composants listés, mais malgré nos efforts, ils peuvent être amenés à changer sans préavis
| Telaio | |
|---|---|
|
Materiale |
|
|
Caratteristiche |
|
|
Telaio |
|
|
Escursione |
|
|
Peso |
|
|
Diametro ruote |
|
| Sospensione | |
|
Forcella |
|
|
Ammortizzatore |
|
|
Remote |
|
| Guarnitura | |
|
Movimento centrale |
|
|
Pacco pignoni |
|
|
Catena |
|
|
Guidacatena |
|
|
Lunghezza pedivelle |
|
|
Guarnitura |
|
|
Deragliatore anteriore |
|
|
Comandi |
|
|
Deragliatore posteriore |
|
|
Comandi |
|
|
Comandi |
|
| Freni | |
|
Freni |
|
|
Freno anteriore |
|
|
Disco anteriore |
|
|
Freno posteriore |
|
|
Disco posteriore |
|
|
Dischi |
|
| Cockpit | |
|
Larghezza manubrio |
|
|
Lunghezza del reggisella |
|
|
Manopole/Nastro |
|
|
Manubrio |
|
|
Serie Sterzo |
|
|
Sella |
|
|
Reggisella |
|
|
Attacco manubrio |
|
|
Lunghezza attacco manubrio |
|
| Ruote | |
|
Cerchio anteriore |
|
|
Mozzo posteriore |
|
|
Pneumatico anteriore |
|
|
Cerchio posteriore |
|
|
Mozzo posteriore |
|
|
Pneumatico posteriore |
|
|
Valvole |
|
|
Cerchi |
|
| Vélo électrique | |
|
Batteria |
|
|
Unité motrice |
|
|
Caricabatteria |
|
|
Range Extender |
|
| Specifiche | |
|
Scatola movimento centrale |
|
|
Attacco freno posteriore |
|
|
ISCG Standard |
|
|
Linea catena |
|
|
Forcellino |
|
|
Downtube Storage |
|
|
Interasse ammortizzatore |
|
|
Axle to Crown Forcella |
|
|
Compatibilità della forcella |
|
|
Offset della forcella |
|
|
Attacco deragliatore anteriore |
|
|
Serie sterzo |
|
|
Massima corona consentita |
|
|
Diametro massimo disco |
|
|
Larghezza massima pneumatico May vary according to tire and rim model |
|
|
Front Spacing |
|
|
Int. mozzo posteriore |
|
|
Escursione posteriore |
|
|
Sag consigliato |
|
|
Liquido |
|
|
Diametro clamp |
|
|
Diametro reggisella |
|
|
Dimensioni boccola anteriore dell'ammo |
|
|
Dimensioni boccola posteriore dell'ammo |
|
|
Shock Mounting Hardware inferiore |
|
|
Shock Mounting Hardware superiore |
|
|
Corsa dell'ammortizzatore |
|
|
Sistema di sospensione |
|
|
UDH |
|
|
Attacco borraccia |
Bullit X0 AXS RSV
Taglie e Geometrie
Se sei a cavallo tra due misure consigliate, la cosa migliore sarebbe quella di provarle entrambe. Ma la prima cosa da fare è di controllare le misure di stack/reach della tua bici attuale e confrontale con quelle del nuovo modello che stai valutando. Questo ti permette di avere un'idea della misura che ti si avvicina di più. Se non hai la possibilità di provare la bici, considera quanto segue.
| s | m | l | xl | xxl | |
|---|---|---|---|---|---|
| Reach (Hi/Lo) | 435/432 | 460/457 | 480/477 | 500/497 | 525/522 |
| Stack (Hi/Lo) | 622/625 | 631/635 | 640/643 | 654/656 | 670/674 |
| Angle de direction (Hi/Lo) | 63.6/63.3 | 63.6/63.3 | 63.6/63.3 | 63.6/63.3 | 63.6/63.3 |
| Longueur du tube de direction | 100 | 110 | 120 | 135 | 155 |
| Longueur des bases | 440 | 443 | 446 | 449 | 452 |
| Front Center | 780 | 809 | 834 | 860 | 894 |
| Hauteur du boitier (Hi/Lo) | 346/342 | 346/342 | 346/342 | 346/342 | 346/342 |
| BB Drop Front (Hi/Lo) | 27/31 | 27/31 | 27/31 | 27/31 | 27/31 |
| BB Drop Rear (Hi/Lo) | 9/13 | 9/13 | 9/13 | 9/13 | 9/13 |
| Empattement | 1220 | 1252 | 1280 | 1309 | 1346 |
| Longueur de tube supérieur | 571 | 596 | 617 | 640 | 670 |
| Longueur du tube de selle | 380 | 400 | 420 | 460 | 500 |
| Angle du tube de selle (Hi/Lo) | 78.6/78.3 | 78.7/78.4 | 78.7/78.4 | 78.7/78.4 | 78.6/78.3 |
| Standover Height (Hi/Lo) | 745/740 | 739/735 | 738/733 | 738/733 | 735/730 |
Bullit X0 AXS RSV
Configurazione & assistenza
Che tu sia l'orgoglioso proprietario di una Bullit o che tu stia semplicemente approfondendo i dettagli, qui troverai tutto quello che stai cercando.
| Peso del Rider (lbs) | Peso del Rider (kg) | Pressione (psi) | Rebound (L/H da chiuso) | Compressione (L/H dal chiuso) |
|---|---|---|---|---|
| 100 | 45 | 57 | 11/8 | 8/5 |
| 120 | 54 | 64 | 10/8 | 8/5 |
| 140 | 64 | 72 | 9/8 | 8/5 |
| 160 | 73 | 81 | 8/7 | 8/5 |
| 180 | 82 | 90 | 7/6 | 6/4 |
| 200 | 91 | 98 | 6/5 | 6/4 |
| 220 | 100 | 107 | 4/3 | 6/4 |
| 240 | 109 | 114 | 2/1 | 6/4 |
| Peso del Rider (lbs) | Peso del Rider (kg) | Pressione (psi) | Sag | Rebound (L/H da chiuso) | Compressione (L/H dal chiuso) |
|---|---|---|---|---|---|
| 100 | 45 | 130 | 28-30%, | 14/6 | 6/3 |
| 120 | 54 | 150 | 28-30%, | 13/5 | 6/3 |
| 140 | 64 | 170 | 28-30%, | 13/4 | 6/3 |
| 160 | 73 | 190 | 28-30%, | 12/3 | 6/3 |
| 180 | 82 | 210 | 28-30%, | 11/3 | 6/3 |
| 200 | 91 | 230 | 28-30%, | 11/2 | 6/3 |
| 220 | 100 | 250 | 28-30%, | 9/2 | 6/3 |
| 240 | 109 | 270 | 28-30%, | 7/1 | 6/3 |
Bullit 4 Small Parts
Compra parti di ricambio| Label | Name | Blurb | Quantity | Torque | Part Number |
|---|---|---|---|---|---|
| A | Head Tube Badge | Clean frame surface, center on headtube | 1 | 20-27756 | |
| B | M5x10 BHCS | Apply Loctite 242 to threads | 4 | 9 Nm | 26-27915 |
| C | Shuttle guard | Line up with battery screws | 1 | 30-27825 | |
| D | Bosch DU Performance CX | Bosch part number EB11.100.00E | 1 | 72-25239 | |
| E | M4x16 BHCS | Apply grease to threads | 3 | 0.65 Nm | 26-23102 |
| F | DU Protector | 1 | 30-27495 | ||
| G | M6x10 BHCS | Apply loctite 242 to threads | 2 | 3 Nm | 26-21224 |
| H | Bosch DU mount nut | Bosch part number EB11.200.03C | 2 | 26-27862 | |
| I | M8x7 Flip Chip | Apply grease to outside surface | 1 | 26-27480 | |
| J | 36.4 Seat Collar | 1 | 34-20201 | ||
| K | M4x26 Bosch Screw | 1 | 26-28150 | ||
| L | Bosch TT System Controller | Bosch part number EB13.100.000 | 1 | 72-25240 | |
| M | Bosch TT adapter | Bosch part number EB13.200.0AE | 1 | 26-27857 |
| Label | Name | Blurb | Quantity | Torque | Part Number |
|---|---|---|---|---|---|
| A | M5x5 Set Screw | Apply Loctite 242 to threads, titghten until flush | 2 | 0.5 Nm | 26-15532 |
| B | Water Bottle Screw | 2 | 26-21360 | ||
| C | Pivot Axle M15x91 | Apply Loctite 242 to threads only, apply grease to shaft only | 1 | 20 Nm | 08-22343 |
| D | M6 Tapered Washer | Apply grease to surface | 2 | 26-15633 | |
| E | M6 Washer | 2 | 26-11817 | ||
| F | M6x20 SHCS | Apply Loctite 242 to threads | 2 | 9 Nm | 26-15947 |
| G | M8x7 Flip Chip | Apply grease to outside surface | 1 | 26-27480 | |
| H | M8x45 Lowhead SHCS | Apply Loctite 242 to threads | 1 | 15.6 Nm | 26-20091 |
| I | Bosch charge socket holder | Bosch part number EB12.120.01A | 1 | 26-27867 | |
| J | Bosch MCx14 Screw | Bosch part number F04N.002.663 | 2 | 26-27869 | |
| K | Bosch COB O-ring | Bosch part number EB12.120.019 | 1 | 26-27868 | |
| L | Bosch charge socket | Bosch part number EB12.120.048 | 1 | 72-25237 | |
| M | Bosch charger port cover | Bosch part number EB12.120.01B | 1 | 26-27866 | |
| N | Bosch DU Insert Sleeve | Bosch part number EB11.200.0GK | 1 | 26-29334 | |
| O | Bosch DU mount bolt front | Bosch part number EB11.200.12M | 1 | 30 Nm | 26-27864 |
| P | Bosch DU mount bolt rear | Bosch part number EB11.200.12H | 1 | 30 Nm | 26-27865 |
| Q | Pivot axle M15x80.5 | Apply Loctite 242 to threads only, apply grease to shaft only | 1 | 20 Nm | 08-16292 |
| R | M4x8 BHCS | Apply grease to threads | 2 | 0.65 Nm | 26-21249 |
| S | Fender | 1 | 30-27475 | ||
| T | M10x10 trunnion screw | Apply Loctite 242 to threads only, apply grease to shaft only | 2 | 16 Nm | 26-27481 |
| U | 6900-2RS Bearing | 2 | 11-12681 | ||
| V | M10x3 Washer | Apply grease to inner surface | 2 | 26-15533 | |
| W | M10x20 bolt | Apply Loctite 242 to threads | 2 | 16 Nm | 26-27484 |
| X | 6902-2RS Max Bearing | 2 | 11-12218 | ||
| Y | Washer | Apply grease to inner surface | 2 | 26-27483 | |
| Z | M10x2.6 Flip Chip | Apply grease to outside surface | 2 | 26-27482 |
| Label | Name | Blurb | Quantity | Torque | Part Number |
|---|---|---|---|---|---|
| A | Rear axle 12x173.7 | Apply grease to shaft and threads | 1 | 08-22209 | |
| B | SCB UDH | Interchangeable with Sram UDH | 1 | 23-23491 | |
| C | SCB UDH screw | Reverse thread | 1 | 20 Nm | 26-23492 |
| D | M10x26 Bolt | Apply Loctite 242 to threads only, apply grease to shaft only | 2 | 16 Nm | 26-27487 |
| E | Dust Shield | Apply grease to inner surface | 4 | 26-27488 | |
| F | 6802-2RS Bearing | 4 | 11-27485 | ||
| G | Bearing spacer | Apply grease to shaft | 2 | 26-27489 | |
| H | M10x6 Nut | Apply grease to inner surface | 2 | 26-27486 | |
| I | Chanistay protector | 1 | 30-27476 | ||
| J | M3x12 BHCS | Apply Loctite 242 to threads | 1 | 0.1 Nm | 26-15939 |
| K | M4x10 FHCS | Apply Loctite 242 to threads | 2 | 0.65 Nm | 26-22938 |
| L | OneUp chainguide | 1 | 19-22609 | ||
| M | OneUp chainguide back plate | 1 | 26-27839 | ||
| N | Cable Loop Guide | 1 | 30-27838 | ||
| O | M3x6 | Apply Loctite 242 to threads | 2 | 0.6 Nm | 26-22358 |
| P | M5x12 HHS | Apply Loctite 242 to threads | 1 | 2 Nm | 26-22570 |
| Q | Seatstay Protector | 1 | 30-21453 |
| Label | Name | Blurb | Quantity | Torque | Part Number |
|---|---|---|---|---|---|
| A | Battery mount rear PT600 | 1 | 26-27493 | ||
| B | M4x10 SHCS | Apply Loctite 242 to threads | 8 | 1.2 Nm | 26-28053 |
| C | Bosch H-Connector | 1 | 26-27870 | ||
| D | Bosch battery PT600 | Bosch part number EB12.100.04X (US/CA), EB12.100.04V (EU, OZ) | 1 | 78-25241 | |
| E | Battery mount front PT600 | 1 | 26-27494 |
| Frame Size | Flip Chip | Setup Key | Setup Cog | 32T | 34T | 36T |
|---|---|---|---|---|---|---|
| S | High | A | 7 | 116 | 118 | 118 |
| M | High | B | 7 | 118 | 118 | 120 |
| L | High | A | 7 | 118 | 118 | 120 |
| XL | High | A | 7 | 118 | 120 | 120 |
| XXL | High | A | 7 | 118 | 120 | 120 |
| S | Low | A | 7 | 118 | 118 | 120 |
| M | Low | A | 7 | 118 | 118 | 120 |
| L | Low | A | 7 | 118 | 120 | 120 |
| XL | Low | A | 7 | 118 | 120 | 120 |
| XXL | Low | A | 7 | 118 | 120 | 120 |
Bullit X0 AXS RSV
Accédez au Owners Club et bénéficiez d'une assistance personnalisée, accédez à des avantages, des opportunités et même des surprises ! Rejoignez le club gratuitement dès maintenant !
En savoir plusNous concevons les vélos Santa Cruz pour qu'ils soient durables et résistants, puis nous assurons leur suivi avec un service légendaire et une garantie de la plus haute qualité.
Santa Cruz Bicycles offre le remplacement gratuit des roulements du cadre à vie, pour le propriétaire d'origine.
If you feel the pull of gravity riding but want an extra push to get to the top, the Bullit is for you. The Bosch Performance Line CX motor gets you to the drop-in of the deepest, wildest trails. Built tough for the biggest terrain, the Bullit is the closest it gets to owning both a downhill bike and a chairlift.
Qualités remarquables
Explorez les qualités remarquables du Bullit, qui font qu'il est si spécial !
Fox 38 Float Factory Grip X2 Fork
Maxxis DoubleDown Tires + Reserve 30 DH Carbon Rims
DT Swiss 350 DF Anti-Pedal Kickback Hub
SRAM Maven Silver Brakes + 200mm Rotors
Allez plus loin
Montageet composants
Géométries et tailles
Configurationet support technique
Autres montages
Bullit 70
Allestimento base, con lo stesso motore Bosch e gli stessi componenti di qualità del resto della gamma Bullit. Nuova trasmissione a cavo SRAM T-Type 70 e sospensioni ad alte prestazioni, senza le numerose regolazioni esterne.
Bullit 90
Componenti affidabili e performanti che offrono un ottimo rapporto qualità-prezzo: ruote Reserve AL, freni SRAM Maven, reggisella telescopico OneUp, sospensioni FOX Float Performance e nuova trasmissione a cavi SRAM T-Type 90.
Bullit GX AXS
Prestazioni d'élite, senza fronzoli. Sospensioni FOX Float Performance Elite davanti e dietro, trasmissione elettronica SRAM GX Eagle AXS T-Type e potenti freni SRAM Maven.
Bullit X0 AXS RSV
Tecnologia all'avanguardia, equipaggiamento di alta gamma e prestazioni eccezionali. Telaio in carbonio CC, trasmissione SRAM T-Type X0 AXS, sospensioni FOX Float Factory e ruote in carbonio Reserve HD/DH montate su mozzi DT Swiss.
Bullit XT Di2 RSV
La crème de la crème. La nouvelle fourche inversée Fox Podium et l'amortisseur à ressort DHX2, la transmission électronique Shimano XT Di2, et les roues carbone Reserve.