Bullit Podium
Le Bullit Podium concentre ce qui se fait de mieux en matière de VTT électrique haut de gamme, dans une édition ultra-limitée. Peinture exclusive, freins SRAM Maven customisés, moyeu e13 Kickback, Range Extender PowerMore 250 Wh… et la fourche Fox Podium qui donne son nom à ce montage d’exception. Chaque composant a été choisi pour repousser les limites, en style comme en performance. Le cadre du Bullit, notre référence pour les journées engagées en montagne, est propulsé par le moteur Bosch Performance Line CX, et comme toujours, il est couvert par notre garantie à vie légendaire sur le cadre et les roulements.
Find a Dealer
Calgary Cycle
4623 Bow Trail SW, Calgary, Alberta, T3C 2G6, Canada
Phone: 1 403-277-3430
Sizes: L
The Bike Shop LTD.
5057 11th St. SE, Calgary, Alberta, T2H 1M7, Canada
Phone: 403-264-0802
Sizes: M
Arrowsmith Bikes - Nanaimo
#202 4300 Wellington Rd, Nanaimo, British Columbia, V9T 2H3, Canada
Phone: (250)758-6675
Sizes: M
Corsa Cycles
38123 Cleveland Ave, Squamish, British Columbia, V8B 0C4, Canada
Phone: (604) 892-3331
Sizes: M
Lakeside Bike Co
1005 7th Ave Unit #3, Inveremere, British Columbia, V0A1K0, Canada
Phone: (250) 342-2453
Sizes: L
Steed Cycles
969 Marine Drive, North Vancouver, British Columbia, V7P1S4, Canada
Phone: (604) 987-2168
Sizes: L
Freeride Mountain Sports
153 Water St., St. John's, Newfoundland, A1C1B1, Canada
Phone: (709)722-7433
Sizes: M
The Bike Zone- Mississauga
734 Dundas St E, #4, East Mississauga, Ontario, L4Y2B6, Canada
Phone: (905) 232 1321
Sizes: L
PittStop Velo Cafe
80 Bd de Bromont, Bromont, Quebec, J2L 2K3, Canada
Phone: 14505343777
Sizes: M
SAISISSEZ VOTRE CHANCE
Il existe moins de 100 exemplaires de ce vélo dans le monde. Contactez votre revendeur Santa Cruz dès maintenant pour réserver le vôtre.
UN MONTAGE QUI VA BIEN PLUS LOIN
VOIR LA GAMME BULLIT
Bullit Podium
Un montage hors norme, en quantité ultra-limitée. Cadre carbone CC avec peinture Black/Pink Splatter exclusive, fourche inversée Fox Podium, freins SRAM Maven customisés… et bien plus encore.
Bullit X0 AXS RSV
Technologie de pointe, équipement très haut de gamme et performances exceptionnelles. Cadre en carbone CC, transmission SRAM T-Type X0 AXS, suspension FOX Float Factory, et roues Reserve HD/DH en carbone montées sur moyeux DT Swiss.
Bullit GX AXS
Des performances d’élite, sans fioritures. Suspension FOX Float Performance Elite avant et arrière, transmission électronique T-Type SRAM GX Eagle AXS, et freins SRAM Maven puissants.
Bullit Podium
Tailles et géométries
Si vous vous trouvez entre deux tailles recommandées, l'idéal est bien sûr d'essayer les deux. Mais à défaut, vous pouvez aussi étudier les mesures de reach et de stack de votre vélo actuel pour les comparer au modèle qui vous intéresse et ainsi vous faire une idée des dimensions qui vous conviennent. Si vous n'avez pas la possibilité d'essayer le vélo, voici quelques éléments à considérer.
| M | L | XL | |
|---|---|---|---|
| Reach | 460 | 480 | 500 |
| Stack | 631 | 640 | 654 |
| Head tube angle | 63.6° | 63.6° | 63.6° |
| K. Longueur du tube de direction | 110 | 120 | 135 |
| G. Longueur des bases | 443 | 446 | 449 |
| Front Center | 809 | 834 | 860 |
| H. Hauteur du boitier | 346 | 346 | 346 |
| BB Drop Front | 27 | 27 | 27 |
| BB Drop Rear | 9 | 9 | 9 |
| E. Empattement | 1252 | 1280 | 1309 |
| M. Longueur de tube supérieur | 596 | 617 | 640 |
| L. Longueur du tube de selle | 400 | 420 | 460 |
| D. Angle du tube de selle | 78.7° | 78.7° | 78.7° |
| M | L | XL | |
|---|---|---|---|
| Reach | 457 | 477 | 497 |
| Stack | 635 | 643 | 656 |
| Head tube angle | 63.3° | 63.3° | 63.3° |
| K. Longueur du tube de direction | 110 | 120 | 135 |
| G. Longueur des bases | 444 | 447 | 450 |
| Front Center | 809 | 834 | 860 |
| H. Hauteur du boitier | 342 | 342 | 342 |
| BB Drop Front | 31 | 31 | 31 |
| BB Drop Rear | 13 | 13 | 13 |
| E. Empattement | 1253 | 1280 | 1310 |
| M. Longueur de tube supérieur | 597 | 618 | 641 |
| L. Longueur du tube de selle | 400 | 420 | 460 |
| D. Angle du tube de selle | 78.4° | 78.4° | 78.4° |
Bullit Podium
Configuration et support technique
Que vous soyez l'heureux propriétaire d'un Bullit ou si vous cherchez à connaitre les moindres détails, vous trouverez tout ici.
| Poids du pilote (lbs) | Poids du pilote (kg) | Pression (psi) | Rebond (depuis tout fermé) | Compression (depuis tout fermé) |
|---|---|---|---|---|
| 100 | 45 | 50 | 14/8 | 2/2 |
| 120 | 54 | 61 | 13/7 | 2/2 |
| 140 | 64 | 73 | 11/6 | 2/2 |
| 160 | 73 | 84 | 8/5 | 2/2 |
| 180 | 82 | 96 | 6/4 | 2/2 |
| 200 | 91 | 108 | 4/3 | 2/2 |
| 220 | 100 | 119 | 2/1 | 2/2 |
| 240 | 109 | 128 | 1/0 | 2/2 |
| Poids du pilote (lbs) | Poids du pilote (kg) | Pression (psi) | Sag | Rebond (depuis tout fermé) | Compression (depuis tout fermé) |
|---|---|---|---|---|---|
| 100 | 45 | 130 | 28-30%, | 14/6 | 6/3 |
| 120 | 54 | 150 | 28-30%, | 13/5 | 6/3 |
| 140 | 64 | 170 | 28-30%, | 13/4 | 6/3 |
| 160 | 73 | 190 | 28-30%, | 12/3 | 6/3 |
| 180 | 82 | 210 | 28-30%, | 11/3 | 6/3 |
| 200 | 91 | 230 | 28-30%, | 11/2 | 6/3 |
| 220 | 100 | 250 | 28-30%, | 9/2 | 6/3 |
| 240 | 109 | 270 | 28-30%, | 7/1 | 6/3 |
| label | name | quantity | part_number | blurb | torque |
|---|---|---|---|---|---|
| A | Head Tube Badge | 1 | 20-27756 | Clean frame surface, center on headtube | |
| B | M5x10 BHCS | 4 | 26-27915 | Apply Loctite 242 to threads | 9 Nm |
| C | Shuttle guard | 1 | 30-27825 | Line up with battery screws | |
| D | Bosch DU Performance CX | 1 | 72-25239 | Bosch part number EB11.100.00E | |
| E | M4x16 BHCS | 3 | 26-23102 | Apply grease to threads | 0.65 Nm |
| F | DU Protector | 1 | 30-27495 | ||
| G | M6x10 BHCS | 2 | 26-21224 | Apply loctite 242 to threads | 3 Nm |
| H | Bosch DU mount nut | 2 | 26-27862 | Bosch part number EB11.200.03C | |
| I | M8x7 Flip Chip | 1 | 26-27480 | Apply grease to outside surface | |
| J | 36.4 Seat Collar | 1 | 34-20201 | ||
| K | M4x26 Bosch Screw | 1 | 26-28150 | ||
| L | Bosch TT System Controller | 1 | 72-25240 | Bosch part number EB13.100.000 | |
| M | Bosch TT adapter | 1 | 26-27857 | Bosch part number EB13.200.0AE |
| label | name | quantity | torque | part_number | blurb |
|---|---|---|---|---|---|
| A | M5x5 Set Screw | 2 | 0.5 Nm | 26-15532 | Apply Loctite 242 to threads, titghten until flush |
| B | Water Bottle Screw | 2 | 26-21360 | ||
| C | Pivot Axle M15x91 | 1 | 20 Nm | 08-22343 | Apply Loctite 242 to threads only, apply grease to shaft only |
| D | M6 Tapered Washer | 2 | 26-15633 | Apply grease to surface | |
| E | M6 Washer | 2 | 26-11817 | ||
| F | M6x20 SHCS | 2 | 9 Nm | 26-15947 | Apply Loctite 242 to threads |
| G | M8x7 Flip Chip | 1 | 26-27480 | Apply grease to outside surface | |
| H | M8x45 Lowhead SHCS | 1 | 15.6 Nm | 26-20091 | Apply Loctite 242 to threads |
| I | Bosch charge socket holder | 1 | 26-27867 | Bosch part number EB12.120.01A | |
| J | Bosch MCx14 Screw | 2 | 26-27869 | Bosch part number F04N.002.663 | |
| K | Bosch COB O-ring | 1 | 26-27868 | Bosch part number EB12.120.019 | |
| L | Bosch charge socket | 1 | 72-25237 | Bosch part number EB12.120.048 | |
| M | Bosch charger port cover | 1 | 26-27866 | Bosch part number EB12.120.01B | |
| N | Bosch DU Insert Sleeve | 1 | 26-29334 | Bosch part number EB11.200.0GK | |
| O | Bosch DU mount bolt front | 1 | 30 Nm | 26-27864 | Bosch part number EB11.200.12M |
| P | Bosch DU mount bolt rear | 1 | 30 Nm | 26-27865 | Bosch part number EB11.200.12H |
| Q | Pivot axle M15x80.5 | 1 | 20 Nm | 08-16292 | Apply Loctite 242 to threads only, apply grease to shaft only |
| R | M4x8 BHCS | 2 | 0.65 Nm | 26-21249 | Apply grease to threads |
| S | Fender | 1 | 30-27475 | ||
| T | M10x10 trunnion screw | 2 | 16 Nm | 26-27481 | Apply Loctite 242 to threads only, apply grease to shaft only |
| U | 6900-2RS Bearing | 2 | 11-12681 | ||
| V | M10x3 Washer | 2 | 26-15533 | Apply grease to inner surface | |
| W | M10x20 bolt | 2 | 16 Nm | 26-27484 | Apply Loctite 242 to threads |
| X | 6902-2RS Max Bearing | 2 | 11-12218 | ||
| Y | Washer | 2 | 26-27483 | Apply grease to inner surface | |
| Z | M10x2.6 Flip Chip | 2 | 26-27482 | Apply grease to outside surface |
| label | name | quantity | part_number | blurb | torque |
|---|---|---|---|---|---|
| A | Rear axle 12x173.7 | 1 | 08-22209 | Apply grease to shaft and threads | |
| B | SCB UDH | 1 | 23-23491 | Interchangeable with Sram UDH | |
| C | SCB UDH screw | 1 | 26-23492 | Reverse thread | 20 Nm |
| D | M10x26 Bolt | 2 | 26-27487 | Apply Loctite 242 to threads only, apply grease to shaft only | 16 Nm |
| E | Dust Shield | 4 | 26-27488 | Apply grease to inner surface | |
| F | 6802-2RS Bearing | 4 | 11-27485 | ||
| G | Bearing spacer | 2 | 26-27489 | Apply grease to shaft | |
| H | M10x6 Nut | 2 | 26-27486 | Apply grease to inner surface | |
| I | Chanistay protector | 1 | 30-27476 | ||
| J | M3x12 BHCS | 1 | 26-15939 | Apply Loctite 242 to threads | 0.1 Nm |
| K | M4x10 FHCS | 2 | 26-22938 | Apply Loctite 242 to threads | 0.65 Nm |
| L | OneUp chainguide | 1 | 19-22609 | ||
| M | OneUp chainguide back plate | 1 | 26-27839 | ||
| N | Cable Loop Guide | 1 | 30-27838 | ||
| O | M3x6 | 2 | 26-22358 | Apply Loctite 242 to threads | 0.6 Nm |
| P | M5x12 HHS | 1 | 26-22570 | Apply Loctite 242 to threads | 2 Nm |
| Q | Seatstay Protector | 1 | 30-21453 |
| label | name | quantity | part_number | torque | blurb |
|---|---|---|---|---|---|
| A | Battery mount rear PT600 | 1 | 26-27493 | ||
| B | M4x10 SHCS | 8 | 26-28053 | 1.2 Nm | Apply Loctite 242 to threads |
| C | Bosch H-Connector | 1 | 26-27870 | ||
| D | Bosch battery PT600 | 1 | 78-25241 | Bosch part number EB12.100.04X (US/CA), EB12.100.04V (EU, OZ) | |
| E | Battery mount front PT600 | 1 | 26-27494 |
| label | name | quantity | part_number | blurb |
|---|---|---|---|---|
| A | Bearing Dust Shield | 4 | 26-11612 | Apply grease to inner surface |
| B | 6902-2RS Max Bearing | 4 | 11-12218 | |
| C | 15x48 Bearing spacer | 1 | 26-17707 | |
| D | 15x40.25 Bearing Spacer | 1 | 26-17013 | |
| E | Cable loop FT NDS | 1 | 26-25329 | |
| F | M3x12 BHCS | 1 | 26-15939 | Apply Loctite 242 to threads |
| Frame Size | Flip Chip | Setup Key | Setup Cog | 32T | 34T | 36T |
|---|---|---|---|---|---|---|
| M | High | B | 7 | 118 | 118 | 118 |
| L | High | A | 7 | 118 | 118 | 120 |
| XL | High | A | 7 | 118 | 120 | 120 |
| M | Low | A | 7 | 118 | 118 | 120 |
| L | Low | A | 7 | 118 | 120 | 120 |
| XL | Low | A | 7 | 118 | 120 | 120 |
Allez plus loin
Tailles et support technique pour le Bullit Podium
Géométries et tailles