Close X

FACTORY SALE*

*Sur une sélection de montages. Durée limitée
v10 2 hero 1
v10 2 detail 1
v10 2 detail 2

Overview

Model Version:2
Production Start:2005
Production End:2007
Suspension/Pivot System:VPP - Virtual Pivot Point
Material:Aluminum - 6000 series
Rear Wheel Travel:255mm
Size Range:S,M,L

Frame Specs

Compatible Forks:160mm to 200mm total travel 200mm travel max
Headtube/Headset:1-1/8" Straight - External. S.H.I.S EC34/28.6 EC34/30
Seat Post:30.9mm - Minimum insertion 100mm
Front Derailleur:N/A - Single Front Chainring Only
BB Shell Width:73mm - Threaded - ISO
Chainline Spec:55mm
Recommended Max Tire Size:2.7 - may vary by tire and rim model
Brakes:Disc Brake - ISO
Max Brake Rotor Size:203mm
Rear Hub:150mm x 12mm Through-Axle
Seatpost Clamp:34.9mm

Shock Specs

Rear Shock Eye-to-Eye:8.75"
Stroke:2.25"
Mounting Bushing Width Front:22mm
Mounting Bushing Width Rear:22mm
Mounting Bolt Diameter Front:8mm
Mounting Bolt Diameter Rear:8mm
Leverage Ratio:3.6 : 1
Rear Shock Setup:Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it.
 The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag is 24-26mm at the shock shaft - This equates to approximately 35% of the total rear wheel travel. Less sag = a firmer suspension feel.For Coil rear shocks here is a rough spring size to weight guideline for average coil shocks.
This can vary based on rear shock model and manufacturer:100-130lbs - 400#140-160lbs - 450#160-170lbs - 500#180-200lbs - 550#210-230lbs - 600#

Torque Specs

FastenerDescriptionPrepTorqueDownload
Lower Pivot BoltsLower Main Pivot Chainring Bolts (4)Loctite 242115 inch lbs-
Lower Bearing Pinch BoltsM6 x 14 low socket head cap screws (4)Loctite 24265 inch lbs-
Upper Pivot At FrameM8 x 1.25 x 14 domed socket head cap screws (2)Loctite 242135 inch lbs-
Upper Pivot At SwingarmM8 x 1.25 x 22.5 domed socket head cap screws (2)Loctite 242135 inch lbs-
Upper Bearing Pinch BoltsM6 x 1 x 20 low socket head cap screws (6)Loctite 24270 inch lbs-
Dropout to FrameChainring Bolt and Nut (4pr)Loctite 242115 inch lbs-
Rear Hub T/A150 x 12mm Through Axle (1)Grease40 inch lbs-
Thru-Axle Pinch BoltM6 x 1 x 14.2 domed socket head cap screw (1)Grease115 inch lbs-
Shock Mounting BoltsM8 x 1.25 x 45 socket head cap screws (2)Loctite 242190 inch lbs-
Fender Mount M6 x 1 x 10 button head cap screw (3)Loctite 24250 inch lbs-

Replacement Parts

Bearings-Only Part Number:04-05038
Dropout/Derailleur Hanger:04-05014 and 04-05015
QR Seatpost Collar:34-15543
Bearing Press and Removal Tool:10-05032
v10 2 exploded 2
v10 2 exploded 3
v10 2 exploded 1
v10 2 exploded 4
v10 2 exploded 5
v10 2 geometry