あなたの理想のバックカントリーライドを実現させるツール

5010はあらゆる分野と状況下で力を発揮し、125mmトラベルバイクの可能性を大きく広げました。

5010 は Bronson の開発で得た知識と経験から生まれました。平均よりも低いボトムブラケット、短いチェーンステイ、VPP™方式の125mmトラベルは機敏な操作性とすばやいライディングを可能にしました。

68度のヘッドアングルと5ポンドのフレーム重量はクライミング時の動きを均等にして負荷を軽減させる事で、バックカントリーで必要とされる機能を 5010 に与え、理想のバックカントリーライドをサポートします。

フレーム 本体価格: ¥297,000 (AL Float) / ¥357,000 (C Float) / ¥426,000 (CC Float)

より多くのトラベルが必要ですか? 多くの特徴を共通し、VPP™方式150mmサスペンションを装備している Bronson はいかがですか?

他の予算をお考えですか? シングルピボットアルミパッケージが採用されている Bantam は 5010 と似たフレーム構造でありながら、お求め易い価格設定がされています。

Key Features:

  • Wheel size: 27.5"
  • Rear travel: 130mm

ジオメトリとサイズ

Rollover table below to highlight frame dimensions.

All measurements reflect installation of a fork with a 519mm axle-to-crown height.

SMLXL
リーチ405mm15.94"425mm16.73"445mm17.52"475mm18.7"
スタック585mm23.03"595mm23.43"604mm23.78"613mm24.13"
ヘッドチューブアングル67°67°67°67°67°67°67°67°
ヘッドチューブの長さ395mm15.55"420mm16.54"450mm17.72"495mm19.49"
Front Center
BBの高さ334mm13.15"334mm13.15"334mm13.15"334mm13.15"
BB Drop20mm0.79"20mm0.79"20mm0.79"20mm0.79"
ホイールベース1117mm43.98"1141mm44.92"1164mm45.83"1198mm47.17"
チェーンステイ長426mm16.77"426mm16.77"426mm16.77"426mm16.77"
ヘッドチューブの長さ100mm3.94"110mm4.33"120mm4.72"130mm5.12"
トップチューブの長さ576mm22.68"598mm23.54"621mm24.45"654mm25.75"
ヘッドチューブのアングル73.8°73.8°73.8°73.8°73.8°73.8°73.8°73.8°
スタンドオーバー高さ711mm27.99"717mm28.23"719mm28.31"732mm28.82"
Eye to Eye Length

Frame Sizing

S
5'0"152 — 5'5"165cm
M
5'5"165 — 5'10"178cm
L
5'10"178 — 6'1"185cm
XL
6'1"185 — 6'6"198cm

Tech Support

Can I mount a chainguide to my bike?

Yes, this bike is equipped with ISCG-05 tabs for easy chainguide mounting.  Most chainguides on the market that are made for this standard should work.

Can I use a dropper post on this bike?

Yes, this frame is equipped for internally routed dropper posts like the Reverb Stealth, KS Lev Integra, or X Fusion HiLo SL Strate. 

Is the 148x12 derailleur hanger the same as the 142x12 hanger?

No, it's not. We had to make a new derailleur hanger to go with the new dropout. They look similar, but the easiest way to tell them apart is the finish. Our 142x12mm hangers have a bead-blasted finish, while the 148x12mm hangers have a smooth, machined finish. 

Should I grease the headset cups when I install them?

Yes, we recommend this. Do not use the Carbon Assembly Compound on the headset, as it will make it more difficult to remove from the frame.

What is the torque spec for the seat collar?

We don't provide a torque spec for the seatpost, because it really depends on what seatpost you are using. Some seatposts are slippery, and require more torque to stay put, and others are very thin- and can be crushed by overzealous tightening. Some are both slippery and thin... Make sure you use the Carbon Assembly Compound included with your frame, and use some common sense.

You will not damage your frame by overtightening the seat collar, assuming you have a 31.6 seatpost in there.

What Kind of Front Derailleur do I Need?

The updated versions of the Bronson, 5010, and Tallboy use Shimano side-swing front derailleurs. The names and part numbers are: 

Shimano XT M8020 Side Swing
Shimano XTR M9020D Side Swing

What kind of rear brake adaptor do I need?

This frame uses a standard IS rear brake mount. Just pick your rotor size and order the correct adaptor to go from IS to post mount (all modern brakes).

What size bottom bracket shell does this bike use?

We use a standard 73mm threaded BB. Nearly any crank on the market (besides BB30 cranks) will fit.

What size seatpost do I need?

This bike uses a 31.6mm seatpost.  Always ensure it is inserted into the frame a minimum of 4" (100mm).