Superlight 2
2002 - 2006
| Model Version | 2 |
|---|---|
| Production Start | 2002 |
| Production End | 2006 |
| Suspension/Pivot System | Single Pivot |
| Material | Aluminum - 6000 series |
| Rear Wheel Travel | 100mm |
| Size Range | S,M,L,XL |
Model Specs
| Compatible Forks | 80mm to 100mm total travel - 100mm travel max |
|---|---|
| Headtube/Headset | 1-1/8" Straight - External. S.H.I.S EC34/28.6 EC34/30 |
| Seat Post | 27.2mm - Minimum insertion 100mm |
| Front Derailleur | 31.8mm Top Pull/Top Swing (Low Clamp) |
| Front Derailleur Clamp | 160mm rotors max |
| BB Shell Width | 68mm - Threaded - ISO |
| Chainline Spec | 50mm |
| Recommended Max Tire Size | 2.2 - may vary by tire and rim model |
| Brakes | Rim Brake and ISO Disc Brake Mounts |
| Max Brake Rotor Size | 160mm |
| Rear Hub | 135mm x 10mm (QR style) |
| Seatpost Clamp | 31.8mm |
Shock Specs
| Rear Shock Eye-to-Eye | 7.875" |
|---|---|
| Stroke | 2.0" |
| Mounting Bushing Width Front | 22mm |
| Mounting Bushing Width Rear | 41mm |
| Mounting Bolt Diameter Front | 8mm |
| Mounting Bolt Diameter Rear | 6mm |
| Leverage Ratio | 2:1 |
| Rear Shock Setup | Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it. The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.-Recommended sag is 8-11mm at the shock shaft - This equates to approximately 15-20% of the total rear wheel travel. Less sag = a firmer suspension feel.-For Air rear shocks, set the air pressure to match the recommended sag. Typically for this model the PSI is approx 25% less than rider weight, but again this varies by rear shock. |
| Rear Shock Notes | The Superlight.2 (2002-2006) uses a slightly different shock rate/curve compared to the Superlight.1 (1998-2001). Rear shocks are the same size, but not the same shock tune at OE. |
Geometry
Torque Specs
| Fastener | Description | Prep | Torque | Download |
|---|---|---|---|---|
| Main Pivot Axle Bolts | Socket Head Cap Screw | Loctite 242 | 80 inch lbs | - |
| Front Shock Mounting Bolts | Socket Head Cap Screw | Loctite 242 | 40 inch lbs | - |
| Rear Shock Mounting Bolt | Socket Head Cap Screw | Nyloc nut | 80 inch lbs | - |
| Main Pivot Bearing Clamp | Socket Head Cap Screw | Loctitie 242 | 40 inch lbs | - |
| Brake Plate Mounting Bolts | Socket Head Cap Screw | Grease | 20 inch lbs | - |
Manuals & Files
If you're looking for more information about your bike check our the Santa Cruz Bicycles Owner's Manual.