Nomad 90
Build Kit & Specs
*Please note: we make every effort to ensure accuracy of spec information, but they are subject to change.
| Frame | |
|---|---|
| Material | |
| Features | |
| Frame | |
| Travel | |
| Weight | |
| Wheel Size | |
| Suspension | |
| Fork | |
| Shock | |
| Remote | |
| Drivetrain | |
| Bottom Bracket | |
| Cassette | |
| Chain | |
| Chainguide | |
| Crank Length | |
| Crankset | |
| Front Derailleur | |
| Left Shifter | |
| Rear Derailleur | |
| Right Shifter | |
| Shifters | |
| Brakes | |
| Brakes | |
| Front Brakes | |
| Front Rotor | |
| Rear Brakes | |
| Rear Rotor | |
| Rotors | |
| Cockpit | |
| Bar Width | |
| Dropper Length | |
| Grips / Bar Tape | |
| Handlebars | |
| Headset | |
| Saddle | |
| Seatpost | |
| Stem | |
| Stem Length | |
| Wheels | |
| Front Rim | |
| Front Hub | |
| Front Tire | |
| Rear Rim | |
| Rear Hub | |
| Rear Tire | |
| Valves | |
| Rims | |
| Ebike | |
| Battery | |
| Drive Unit | |
| Battery Charger | |
| Specs | |
| Bottom Bracket Shell | |
| Rear Brake Mount | |
| Chainguide_standard | |
| Chainline | |
| Derailleur Hanger | |
| Shock Length | |
| Fork Axle to Crown | |
| Fork Compatibility | |
| Fork Offset | |
| Front Derailleur Mount | |
| Headset | |
| Max Chainring Size | |
| Max Rotor Size | |
| Max Tire Clearance | |
| Rear Spacing | |
| Rear Travel | |
| Recommended Sag | |
| Sealant | |
| Seat Clamp Diameter | |
| Seat Post Diameter | |
| Shock Bushing Size Front | |
| Shock Bushing Size Rear | |
| Shock Mounting Hardware Lower | |
| Shock Mounting Hardware Upper | |
| Shock Stroke | |
| Suspension System | |
| UDH Compatible | |
| Water Bottle Mounts |
Nomad 90
Sizing & Geometry
If you're on the cusp between the recommended height range of two sizes, the absolute best thing is to try to ride them both. At a minimum, check the stack/reach measurements on your current bike and compare it to the new model you are looking at to get an idea of a fit you are already comfortable with. If riding the bike is not an option, consider the following.
| s | m | l | xl | xxl | |
|---|---|---|---|---|---|
| Reach (Hi/Lo) | 430/427 | 455/452 | 475/472 | 495/492 | 520/517 |
| Stack (Hi/Lo) | 616/618 | 625/627 | 638/640 | 656/658 | 670/672 |
| Head Tube Angle (Hi/Lo) | 63.8/63.5 | 63.8/63.5 | 63.8/63.5 | 63.8/63.5 | 63.8/63.5 |
| Seat Tube Angle (Hi/Lo) | 77.2/77 | 77.4/77.2 | 77.9/77.6 | 77.8/77.5 | 77.7/77.5 |
| Wheelbase (Hi/Lo) | 1209/1209 | 1239/1240 | 1269/1270 | 1301/1302 | 1336/1337 |
| Front Center (Hi/Lo) | 770/770 | 799/799 | 826/826 | 855/855 | 886/886 |
| Rear Center (Hi/Lo) | 439/440 | 440/441 | 443/444 | 446/447 | 450/451 |
| BB Height (Hi/Lo) | 346/343 | 346/343 | 346/343 | 346/343 | 346/343 |
| BB Drop Front (Hi/Lo) | 27/30 | 27/30 | 27/30 | 27/30 | 27/30 |
| BB Drop Rear (Hi/Lo) | 8/11 | 8/11 | 8/11 | 8/11 | 8/11 |
| Standover Height (Hi/Lo) | 709/705 | 716/713 | 723/719 | 722/717 | 725/720 |
| Head Tube Length | 90/90 | 100/100 | 115/115 | 135/135 | 150/150 |
| Seat Tube Length | 380/380 | 405/405 | 430/430 | 460/460 | 500/500 |
| Top Tube Length (Hi/Lo) | 570/571 | 594/594 | 612/613 | 637/638 | 666/667 |
Nomad 90
Setup & Support
Whether you’re the proud owner of a Nomad or are just digging deep into the details you’ll find it all here.
| Rider Weight (lbs) | Rider Weight (kgs) | Pressure (psi) | Sag | Rebound (from closed) |
|---|---|---|---|---|
| 100 | 45 | 125 | 29-31%, | 9 |
| 120 | 54 | 145 | 29-31%, | 8 |
| 140 | 64 | 165 | 29-31%, | 7 |
| 160 | 73 | 185 | 29-31%, | 6 |
| 180 | 82 | 210 | 29-31%, | 5 |
| 200 | 91 | 230 | 29-31%, | 4 |
| 220 | 100 | 250 | 29-31%, | 3 |
| 240 | 109 | 270 | 29-31%, | 2 |
| 260 | 118 | 290 | 29-31%, | 1 |
| Rider Weight (lbs) | Rider Weight (kgs) | Pressure (psi) | Rebound (from closed) |
|---|---|---|---|
| 120 | 54 | 72 | 13 |
| 130 | 59 | 76 | 12 |
| 140 | 64 | 80 | 11 |
| 150 | 68 | 84 | 10 |
| 160 | 73 | 89 | 9 |
| 170 | 77 | 93 | 8 |
| 180 | 82 | 97 | 7 |
| 190 | 86 | 102 | 6 |
| 200 | 91 | 106 | 5 |
| 210 | 95 | 110 | 4 |
| 220 | 100 | 114 | 3 |
| 230 | 104 | 119 | 2 |
| 240 | 109 | 123 | 1 |
| label | part_number | quantity | name | blurb |
|---|---|---|---|---|
| A | 29-23753 | 1 | Upper Link | |
| B | 11-12681 | 2 | 6900-2RS Bearing | |
| C | 26-15533 | 2 | M10x3 Washer | Apply grease to inner surface |
| D | 26-11612 | 2 | Bearing Dust Shield | Apply grease to inner surface |
| E | 11-12218 | 2 | 6902-2RS Max Bearing | |
| F | 26-17013 | 1 | 15x40.25 Bearing Spacer |
| label | part_number | quantity | name | blurb | torque |
|---|---|---|---|---|---|
| A | 29-23751 | 1 | Lower Link | ||
| B | 11-17708 | 4 | 6902-1ZR Bearing | ||
| C | 26-11612 | 4 | Bearing Dust Shield | Apply grease to inner surface | |
| D | 26-19126 | 1 | 15x28 Bearing spacer | ||
| E | 26-17013 | 1 | 15x40.25 Bearing Spacer | ||
| F | 26-12678 | 1 | M6 Grease Fitting | 9 Nm | |
| G | 26-15532 | 1 | M5x5 Set Screw | Apply Loctite 242 to threads, titghten until flush |
| label | part_number | quantity | name | torque | blurb |
|---|---|---|---|---|---|
| A | 26-22843 | 1 | Glovebox lid | ||
| B | 26-25333 | 1 | Glovebox bezel | ||
| C | 26-23284 | 4 | M3x8 BHCS | 0.5 Nm | Apply Loctite 242 to threads |
| D | 30-23225 | 2 | Glovebox nut | ||
| E | 26-22358 | 1 | M3x6 | 0.6 Nm | Apply Loctite 242 to threads |
| F | 30-22620 | 1 | Storage Bulkhead | Install inside Downtube |
| label | part_number | quantity | name | blurb | torque |
|---|---|---|---|---|---|
| A | 08-22208 | 1 | Rear axle 12x168.5 | Apply grease to shaft and threads | |
| B | 23-23491 | 1 | SCB UDH | Interchangeable with Sram UDH | |
| C | 26-23492 | 1 | SCB UDH screw | Reverse thread | 20 Nm |
| D | 30-20361 | 1 | Chainstay Protector | ||
| E | 26-15939 | 1 | M3x12 BHCS | Apply grease to treads | 0.5 Nm |
| F | 30-21453 | 1 | Seatstay Protector | ||
| G | 49-21567 | 1 | Lower Link Fender | ||
| H | 26-18382 | 2 | M4x12 BHC | Apply grease to treads | 0.65 Nm |
| label | part_number | quantity | torque | name | blurb |
|---|---|---|---|---|---|
| A | 26-20122 | 2 | 16 Nm | M10x23 Screw | Apply Loctite 242 to threads only, apply grease to shaft only |
| B | 26-22461 | 2 | 20 Nm | M8x45 Shock Bolt | Apply Loctite 242 to threads |
| C | 26-21452 | 1 | M8x2 Flip Chip NDS | Apply grease to surface | |
| D | 26-21451 | 1 | M8x2 Flip Chip DS | Apply grease to surface | |
| E | 26-15947 | 2 | 9 Nm | M6x20 SHCS | Apply Loctite 242 to threads |
| F | 26-11817 | 2 | M6 Washer | ||
| G | 26-15633 | 2 | M6 Tapered Washer | Apply grease to surface | |
| H | 08-22343 | 1 | 20 Nm | Pivot Axle M15x91 | Apply Loctite 242 to threads only, apply grease to shaft only |
| I | 08-16292 | 1 | 20 Nm | Pivot axle M15x80.5 | Apply Loctite 242 to threads only, apply grease to shaft only |
| J | 08-16291 | 1 | 20 Nm | Pivot axle M15x68.5 | Apply Loctite 242 to threads only, apply grease to shaft only |
| label | part_number | quantity | name | blurb | torque |
|---|---|---|---|---|---|
| A | 67-19217 | 1 | Head Tube Badge | Clean frame surface, center on headtube | |
| B | 30-23750 | 1 | Shuttle Guard Mount | ||
| C | 30-22560 | 1 | Shuttle Guard | ||
| D | 26-21249 | 2 | M4x8 BHCS | Apply grease to threads | 0.65 Nm |
| E | 30-23718 | 1 | Downtube Protector | ||
| F | 26-18382 | 2 | M4x12 BHC | Apply grease to treads | 0.65 Nm |
| G | 34-20201 | 1 | 36.4 Seat Collar |
| Frame Size | Flip Chip | Setup Key | Setup Cog | 30T | 32T | 34T | 36T |
|---|---|---|---|---|---|---|---|
| Small | High | B | 7 | 116 | 116 | 118 | 118 |
| Medium | High | B | 7 | 116 | 116 | 118 | 118 |
| Large | High | B | 7 | 116 | 118 | 118 | 120 |
| XLarge | High | B | 7 | 116 | 118 | 118 | 120 |
| XXLarge | High | B | 7 | 118 | 118 | 120 | 120 |
| Small | Low | B | 7 | 116 | 116 | 118 | 118 |
| Medium | Low | B | 7 | 116 | 118 | 118 | 120 |
| Large | Low | B | 7 | 116 | 118 | 118 | 120 |
| XLarge | Low | B | 7 | 118 | 118 | 120 | 120 |
| XXLarge | Low | B | 7 | 118 | 118 | 120 | 120 |
Nomad 90
Get access to the exclusive SCB Owners Club which gives you access to added levels of rider support, treats, opportunities and benefits. Join the club today for free! It takes just five minutes to receive a lifetime of membership perks.
Learn MoreWe build Santa Cruz bicycles to be durable and long lasting, and then back them up with legendary support and a warranty of the highest standard.
Santa Cruz Bicycles offers free replacement pivot bearings to the original owner for as long as they own their bike.
Load up the van, hit the road, climb a mountain, hammer it back down, huck the gap, throw the bike back in the van, drive to the bike park and do laps on laps. Hell, you could even rock up to the startline of the world's wildest races. The Nomad’s forte is being ready and willing to go wherever, whenever. The only thing it needs is a rider willing to press send.
Dig Deep
Build kit& Specs
Geometry& Sizing
Setup& Support
Other Builds
Nomad 70
Base model with same tires and big rotors as all Nomads. SRAM 70 cable actuated T-Type Transmission, FOX Float X rear shock, and Reserve AL rims.
Nomad GX AXS
Full SRAM GX Eagle electronic Transmission and the most powerful SRAM Maven brakes.
Nomad X0 AXS
CC carbon frame, full SRAM X0 T-TYPE electronic drivetrain, top spec suspension and Industry Nine hubs and powerful SRAM Maven Silver Stealth brakes
Nomad X0 AXS RSV
CC carbon frame, full SRAM X0 T-TYPE electronic drivetrain, top spec suspension and SRAM Maven Silver Stealth brakes, plus legendary carbon Reserve wheels on Industry Nine hubs.