Bullit S
Build Kit & Specs
*Please note: we make every effort to ensure accuracy of spec information, but they are subject to change.
| Frame | |
|---|---|
| Material | |
| Features | |
| Frame | |
| Travel | |
| Weight | |
| Wheel Size | |
| Suspension | |
| Fork | |
| Shock | |
| Remote | |
| Drivetrain | |
| Bottom Bracket | |
| Cassette | |
| Chain | |
| Chainguide | |
| Crank Length | |
| Crankset | |
| Front Derailleur | |
| Left Shifter | |
| Rear Derailleur | |
| Right Shifter | |
| Shifters | |
| Brakes | |
| Brakes | |
| Front Brakes | |
| Front Rotor | |
| Rear Brakes | |
| Rear Rotor | |
| Rotors | |
| Cockpit | |
| Bar Width | |
| Dropper Length | |
| Grips / Bar Tape | |
| Handlebars | |
| Headset | |
| Saddle | |
| Seatpost | |
| Stem | |
| Stem Length | |
| Wheels | |
| Front Rim | |
| Front Hub | |
| Front Tire | |
| Rear Rim | |
| Rear Hub | |
| Rear Tire | |
| Valves | |
| Rims | |
| Ebike | |
| Battery | |
| Drive Unit | |
| Battery Charger | |
| Specs | |
| Bottom Bracket Shell | |
| Rear Brake Mount | |
| Chainguide_standard | |
| Chainline | |
| Derailleur Hanger | |
| Shock Length | |
| Fork Axle to Crown | |
| Fork Compatibility | |
| Fork Offset | |
| Front Derailleur Mount | |
| Headset | |
| Max Chainring Size | |
| Max Rotor Size | |
| Max Tire Clearance | |
| Rear Spacing | |
| Rear Travel | |
| Recommended Sag | |
| Sealant | |
| Seat Clamp Diameter | |
| Seat Post Diameter | |
| Shock Bushing Size Front | |
| Shock Bushing Size Rear | |
| Shock Mounting Hardware Lower | |
| Shock Mounting Hardware Upper | |
| Shock Stroke | |
| Suspension System | |
| UDH Compatible | |
| Water Bottle Mounts |
Bullit S
Sizing & Geometry
Find your Size
If you're on the cusp between the recommended height range of two sizes, the absolute best thing is to try to ride them both. At a minimum, check the stack/reach measurements on your current bike and compare it to the new model you are looking at to get an idea of a fit you are already comfortable with. If riding the bike is not an option, consider the following.
A larger size frame will be more stable, and will give you more room to move without upsetting the weight-balance of the bike. The larger size will put the front wheel further in front of you, which gives the feeling of security and conversely, it will require more significant body movements when you WANT to shift the weight-bias of the bike. Think hard about your riding style and how active/intuitive you want it to be vs stable and speedy. You'll need to work a bit harder to muscle the larger bike around.
Not all bodies at a given height are the same. If you have longer legs and a shorter torso than the average person your height, that may push you towards the smaller of the recommended sizes. If you're all torso and arms, most likely you'll want to size up.
Medium
Large
X-Large
XX-Large
165cm
5'5"
-
175cm
5'9"
Reach: 450mm
175cm
5'9"
-
185cm
6'1"
Reach: 475mm
185cm
6'1"
-
193cm
6'4"
Reach: 495mm
193cm
6'4"
-
200cm
6'7"
Reach: 515mm
All units are in millimeters or degrees.
| m | l | xl | xxl | |
|---|---|---|---|---|
| Reach | 450 | 475 | 495 | 515 |
| Stack | 621 | 630 | 648 | 670.4 |
| Head tube angle | 64° | 64° | 64° | 64° |
| Seat Tube Length | 405 | 430 | 460 | 500 |
| Front Center | 789.4 | 818.8 | 847.5 | 878.5 |
| BB Height | 348 | 348 | 348 | 348 |
| BB Drop | 25.5/6.5 | 25.5/6.5 | 25.5/6.5 | 25.5/6.5 |
| Wheelbase | 1238.5 | 1267.9 | 1296.7 | 1327.7 |
| Rear Center | 449 | 449 | 449 | 449 |
| Head Tube Length | 100 | 110 | 130 | 155 |
| Top Tube Length | 591.3 | 619.2 | 644.9 | 672.1 |
| Seat Tube Angle | 77.2° | 77.1° | 77° | 76.8° |
| Standover Height | 748 | 747 | 745 | 745 |
Bullit S
Setup & Support
Whether you’re the proud owner of a Bullit or are just digging deep into the details you’ll find it all here.
Fox 38 Performance 170
| Rider Weight (lbs) | Rider Weight (kgs) | Pressure (psi) | Rebound (from closed) |
|---|---|---|---|
| 120 | 54 | 76 | 12 |
| 130 | 59 | 80 | 11 |
| 140 | 64 | 84 | 10 |
| 150 | 68 | 88 | 9 |
| 160 | 73 | 92 | 8 |
| 170 | 77 | 96 | 7 |
| 180 | 82 | 99 | 6 |
| 190 | 86 | 104 | 5 |
| 200 | 91 | 109 | 4 |
| 210 | 95 | 114 | 3 |
| 220 | 100 | 119 | 2 |
| 230 | 104 | 123 | 1 |
Rockshox Super Deluxe Select Plus
| Rider Weight (lbs) | Rider Weight (kgs) | Pressure (psi) | Sag | Rebound (from closed) |
|---|---|---|---|---|
| 100 | 45 | 100 | 29-32%, 18-20mm | 7 |
| 120 | 54 | 125 | 29-32%, 18-20mm | 7 |
| 140 | 64 | 145 | 29-32%, 18-20mm | 7 |
| 160 | 73 | 170 | 29-32%, 18-20mm | 6 |
| 180 | 82 | 190 | 29-32%, 18-20mm | 6 |
| 200 | 91 | 215 | 29-32%, 18-20mm | 6 |
| 220 | 100 | 235 | 29-32%, 18-20mm | 5 |
| 240 | 109 | 260 | 29-32%, 18-20mm | 5 |
| 260 | 118 | 280 | 29-32%, 18-20mm | 5 |
Battery Cover, Seat Collar, Downtube Protector, and Headbadge
| label | part_number | quantity | name | blurb | torque |
|---|---|---|---|---|---|
| A | 67-19217 | 1 | Head Tube Badge | Clean frame surface, center on headtube | |
| B | 72-21292 | 1 | Shimano BM-E8030 | For EP801 use battery mount BM-EN801 (72-24168) | |
| C | 78-21554 | 1 | Shimano BT-E8036 | For EP801 use battery BT-EN806 (78-24169) | |
| D | 26-18382 | 6 | M4x12 BHCS | Apply grease to treads | 0.65 Nm |
| E | 30-22329 | 1 | Bullit 3C battery cover | ||
| F | 26-15939 | 2 | M3x12 BHCS | Apply Loctite 242 to threads | 0.1 Nm |
| G | 30-22358 | 1 | DU Protector | ||
| H | 26-22358 | 1 | M3x6 | Apply Loctite 242 to threads | 0.6 Nm |
| I | 26-19207 | 2 | Hose Grommet | ||
| J | 34-20201 | 2 | 36.4 Seat Collar |
Loading
Upper and Lower Linkage Bolts
| label | part_number | quantity | torque | name | blurb |
|---|---|---|---|---|---|
| A | 26-20122 | 2 | 16 Nm | M10x23 Screw | Apply Loctite 242 to threads only, apply grease to shaft only |
| B | 26-21360 | 2 | Water Bottle Screw | ||
| C | 08-22343 | 2 | 20 Nm | Pivot Axle M15x91 | Apply Loctite 242 to threads only, apply grease to shaft only |
| D | 26-15633 | 3 | M6 Tapered Washer | Apply grease to surface | |
| E | 26-11817 | 3 | M6 Washer | ||
| F | 26-15947 | 3 | 9 Nm | M6x20 SHCS | Apply Loctite 242 to threads |
| G | 26-21231 | 1 | 22 Nm | M8x50 Shock Bolt | Apply loctite 242 to threads |
| H | 72-21270 | 1 | Shimano EW-CP100 | Charge port for EP8 & EP801 | |
| I | 26-15939 | 2 | 0.1 Nm | M3x12 BHCS | Apply Loctite 242 to threads |
| J | 26-21223 | 1 | 12.5 Nm | M8x20 BHCS | Apply Loctite 242 to threads |
| K | 72-21559 | 1 | Shimano DC-EP800 | For EP801 use DC-EP801 (72-24172) | |
| L | 08-20879 | 1 | 20 Nm | Pivot Axle M15x72 | Apply Loctite 242 to threads only, apply grease to shaft only |
| M | 26-21231 | 1 | 22 Nm | M8x50 Shock Bolt | Apply loctite 242 to threads |
Loading
Rear Axle, Derailleur Hanger, and Chainstay Protector
| label | part_number | quantity | name | blurb | torque |
|---|---|---|---|---|---|
| A | 08-22209 | 1 | Rear axle 12x173.7 | Apply grease to shaft and threads | |
| B | 23-23491 | 1 | SCB UDH | Interchangeable with Sram UDH | |
| C | 26-23492 | 1 | SCB UDH screw | Reverse thread | 20 Nm |
| D | 30-21226 | 1 | Chainstay Protector | ||
| E | 26-15939 | 1 | M3x12 BHCS | Apply Loctite 242 to threads | 0.1 Nm |
| F | 30-20189 | 1 | Chainstay Protector | ||
| G | 26-21223 | 3 | M8x20 BHCS | Apply Loctite 242 to threads | 12.5 Nm |
| H | 26-18382 | 2 | M4x12 BHCS | Apply grease to treads | 0.65 Nm |
| I | 49-21567 | 1 | Lower Link Fender | ||
| J | 30-21453 | 1 | Seatstay Protector | ||
| K | 26-21361 | 1 | Hose Grommet Single | ||
| L | 26-15939 | 1 | M3x12 BHCS | Apply Loctite 242 to threads | 0.1 Nm |
| M | 72-22286 | 1 | Shimano Speed Sensor | Use for both EP8 & EP801 |
Loading
Upper Link
| label | part_number | quantity | name | blurb |
|---|---|---|---|---|
| A | 29-22342 | 1 | Upper Link | |
| B | 11-12681 | 2 | 6900-2RS Bearing | |
| C | 26-15533 | 2 | M10x3 Washer | Apply grease to inner surface |
| D | 26-11612 | 2 | Bearing Dust Shield | Apply grease to inner surface |
| E | 11-12218 | 2 | 6902-2RS Max Bearing | |
| F | 26-17013 | 1 | 15x40.25 Bearing Spacer |
Loading
Lower Link
| label | part_number | quantity | name | blurb | torque |
|---|---|---|---|---|---|
| A | 29-22341 | 1 | Lower Link | ||
| B | 11-17708 | 4 | 6902-1ZR Bearing | ||
| C | 26-11612 | 4 | Bearing Dust Shield | Apply grease to inner surface | |
| D | 26-20880 | 1 | 15x32 Bearing Spacer | ||
| E | 26-17707 | 1 | 15x48 Bearing spacer | ||
| F | 26-12678 | 1 | M6 Grease Fitting | 9 Nm | |
| G | 26-15532 | 1 | M5x5 Set Screw | Apply Loctite 242 to threads, titghten until flush | 0.5 Nm |
Loading
| Frame Size | Flip Chip | Setup Key | Setup Cog | 32T | 34T | 36T |
|---|---|---|---|---|---|---|
| S | High | A | 7 | 116 | 116 | 118 |
| M | High | B | 7 | 116 | 118 | 118 |
| L | High | A | 7 | 116 | 118 | 118 |
| XL | High | A | 7 | 118 | 118 | 120 |
| XXL | High | A | 7 | 118 | 118 | 120 |
| S | Low | A | 7 | 116 | 118 | 118 |
| M | Low | A | 7 | 116 | 118 | 118 |
| L | Low | A | 7 | 118 | 118 | 120 |
| XL | Low | A | 7 | 118 | 118 | 120 |
| XXL | Low | A | 7 | 118 | 118 | 120 |
If you're looking for more information about your bike check our the Santa Cruz Bicycles Owner's Manual.
Bullit S
See dealer for pricing
Get access to the exclusive SCB Owners Club which gives you access to added levels of rider support, treats, opportunities and benefits. Join the club today for free! It takes just five minutes to receive a lifetime of membership perks.
Learn MoreWe build Santa Cruz bicycles to be durable and long lasting, and then back them up with legendary support and a warranty of the highest standard.
Santa Cruz Bicycles offers free replacement pivot bearings to the original owner for as long as they own their bike.
Carbon
CC
Front (MM)
170
Rear (MM)
170
Wheel Size
MX
49.93
22.65
Weight (lbs)
49.93
Weight (kg)
22.65
If you feel the pull of gravity-riding but want extra push to get to the top, the Bullit is for you. Specifically designed to be at home on the biggest-hitting terrain but with the added boost of an electric motor to drop you at the the drop-in of the wildest trails, the Bullit is the nearest thing to owning a downhill bike and a chairlift.
Dig Deep
Specs, sizing and support for the Bullit S
Build kit& Specs
Geometry& Sizing
Setup& Support
