Close X

FACTORY SALE

Limited time only. Subject to availability.

nomad 1 hero 1
nomad 1 detail 1
nomad 1 detail 2

Overview

Model Version:1
Production Start:2005
Production End:2008
Suspension/Pivot System:VPP - Virtual Pivot Point
Material:Aluminum - 6000 series
Rear Wheel Travel:165mm
Size Range:S,M,L,XL

Frame Specs

Compatible Forks:140mm to 180mm total travel 180mm travel max
Headtube/Headset:*See Component Notes
Seat Post:30.9mm - Minimum insertion 100mm
Front Derailleur:34.9mm Top Pull/Top Swing (Low Clamp)
BB Shell Width:73mm - Threaded - ISO
Chainline Spec:50mm
Recommended Max Tire Size:2.5 - may vary by tire and rim model
Brakes:Disc Brake - ISO
Max Brake Rotor Size:203mm
Rear Hub:135mm x 10mm (QR style)
Seatpost Clamp:34.9mm
Component Notes:Nomad 1 uses 1-1/8" straight steerer fork with external cup headset. S.H.I.S. EC34/28.6 EC34/30Nomad 1.5 uses 1.5" straight steerer fork with external cup headset. S.H.I.S. EC49/38.1 EC49/40

Shock Specs

Rear Shock Eye-to-Eye:8.5”
Stroke:2.5”
Mounting Bushing Width Front:22mm
Mounting Bushing Width Rear:22mm
Mounting Bolt Diameter Front:3/8” (9.53mm)
Mounting Bolt Diameter Rear:3/8” (9.53mm)
Leverage Ratio:*2.6 : 1
Rear Shock Setup:Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it.
The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag is 15-20mm at the shock shaft - This equates to approximately 25-30% of the total rear wheel travel. Less sag = a firmer suspension feel.For Air rear shocks, set the air pressure to match the recommended sag. Typically for this model the PSI is approximately equal to rider weight (150lb rider = around 150psi) but again this varies by rear shock model.

Torque Specs

FastenerDescriptionPrepTorqueDownload
Lower Pivot BoltsAllen Chainring Bolts (4)Loctite 242115 inch lbs-
Upper Link To 
Top TubeAllen Chairing Bolts (2)Loctite 242115 inch lbs-
Upper Link To 
Swingarm Nomad Upper Pivot Through Axle Grease outer shaft
Loctite 242 threads40 inch lbs-
Swingarm to Axle Pinch BoltsM6 x 14 low socket head cap screwLoctitie 24270 inch lbs-
Dropout to ChainstayM8 X 1.25 X14 domed socket head cap screwLoctite 242110 inch lbs-

Replacement Parts

Bearings-Only Part Number:04-05063 (Rev A) 04-05080 (Rev B)
Dropout/Derailleur Hanger:04-05062
Lower Link:29-11620
nomad 1 exploded 1
nomad 1 exploded 2
nomad 1 exploded 3
nomad 1 exploded 4
nomad 1 exploded 5
nomad 1 geometry