Santa Cruz Bicycles

NOTICE: *New* Bearing Adjustment Guide - Angular Contact & Radial Bearings

Bearing Adjustment Guide

Introduction

Special tools and knowledge are necessary for the service of your bicycle. For your safety, only an authorized dealer should install, adjust, or service the frame or the components. Special tools and parts may be required to complete this service. Make sure to set up a maintenance schedule with your dealer to keep your bicycle safe and performing its best. Consult your dealer if you have any questions or concerns about proper setup and riding your bike. Stop riding immediately and consult your dealer if you suspect any problems with your bicycle.

For current service instructions, part numbers, and technical information, visit www.santacruzbicycles.com, Please contact your local Santa Cruz Bicycles® distributor or dealer for questions and orders. Information contained in this publication is subject to change at any time without prior notice. The appearance of your product appearance may differ from the images contained in this publication.

Adhere to all torque and sizing specifications for press fits and thread fits. Over-tightening can damage threads or cause parts to fail. Using the wrong size part can cause parts to fail and may cause a crash, which can result in serious injury and/or death.

You must register your bicycle in order to make a warranty claim (see the instructions on the warranty page).

Always wear safety glasses and personal protective equipment, such as latex or nitrile gloves when servicing Santa Cruz Bicycles products. 

Bearing Adjustment

For MY17 and earlier models, we recommend completing a bearing adjustment every 20-30 hours of riding, depending on your riding style and riding conditions. For MY18 models, this procedure only needs to be done once after approximately 5-10 hours of riding on new bearings. 

MY17 models have angular contact bearings (bearing numer begins with a 7).

MY18 models have radial bearings (bearing numer begins with a 6). Verify which bearings are on your bike by consulting your bicycle dealer or checking the number on the bearings (colors vary). 

 

You are viewing the site. Is that correct? YES NO - Choose Region