Close X

FACTORY SALE

Limited time only. Subject to availability.

heckler 6 hero 1
heckler 6 detail 1
heckler 6 detail 2

Overview

Model Version:6
Production Start:2007
Production End:2012
Suspension/Pivot System:Single Pivot
Material:Aluminum - 6000 series
Rear Wheel Travel:150mm
Size Range:S,M,L,XL

Frame Specs

Compatible Forks:140mm to 160mm total travel 160mm travel max
Headtube/Headset:*See Component Notes
Seat Post:30.9mm - Minimum insertion 100mm
Front Derailleur:34.9mm Top Pull/Top Swing (Low Clamp)
BB Shell Width:73mm - Threaded - ISO
Chainline Spec:50mm
Recommended Max Tire Size:2.5 - may vary by tire and rim model
Brakes:Disc Brake - ISO
Max Brake Rotor Size:203mm
Rear Hub:135mm x 10mm (QR style)
Seatpost Clamp:34.9mm
Component Notes:2008 to 2012 Heckler.6 and 6.1 models head tube / headset - 1-1/8" External2013 generation Heckler.6.2 head tube/ headset - Tapered (Mix Taper)- Semi-integrated 1-1/8" upper cup (44mm ID standard)- Standard External 1.5"  ower cup (49mm)Mixed Taper S.H.I.S  #’sUpper ZS 44 / 28.6Lower EC 49 / 40Chris King refers to this headset as - Inset 3

Shock Specs

Rear Shock Eye-to-Eye:8.5"
Stroke:2.5"
Mounting Bushing Width Front:22mm
Mounting Bushing Width Rear:22mm
Mounting Bolt Diameter Front:8mm
Mounting Bolt Diameter Rear:8mm
Leverage Ratio:2.4 : 1
Rear Shock Setup:Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it.
The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag is 15mm at the shock shaft - This equates to approximately 25% of the total rear wheel travel. Less sag = a firmer suspension feel.For Air rear shocks, set the air pressure to match the recommended sag. Typically for this model the PSI is approximately equal to rider weight (150lb rider = around 150psi) but again this varies by rear shock model.

Replacement Parts

Propack Part Number:04-05072 (Heckler 6.0) 04-12671 (Heckler 6.1 and 6.2)
Bearings-Only Part Number:04-05071
Dropout/Derailleur Hanger:04-05070 or 04-05074 (with bottle opener)
QR Seatpost Collar:34-15543
heckler 6 exploded 1
heckler 6 exploded 2
heckler 6 exploded 3
heckler 6 exploded 6
heckler 6 exploded 4
heckler 6 exploded 5