Close X

FACTORY SALE

Limited time only. Subject to availability.

blur lt 1 hero 1
blur lt 1 detail 1
blur lt 1 detail 2

Overview

Model Version:LT 1
Production Start:2005
Production End:2007
Suspension/Pivot System:VPP - Virtual Pivot Point
Material:Aluminum - 6000 series
Rear Wheel Travel:135mm
Size Range:S,M,L,XL

Frame Specs

Compatible Forks:130mm to 160mm - 160mm travel max
Headtube/Headset:1-1/8" Straight - External. S.H.I.S EC34/28.6 EC34/30
Seat Post:30.9mm - Minimum insertion 100mm
Front Derailleur:34.9mm Top Pull/Top Swing (Low Clamp)
BB Shell Width:68mm - Threaded - ISO
Chainline Spec:50mm
Recommended Max Tire Size:2.35 - may vary by tire and rim model
Brakes:Rim Brake and/or ISO Disc Brake Mounts
Max Brake Rotor Size:203mm
Rear Hub:135mm x 10mm (QR style)
Seatpost Clamp:34.9mm

Shock Specs

Rear Shock Eye-to-Eye:7.875” / 200mm
Stroke:2.25"/ 57mm
Mounting Bushing Width Front:22mm
Mounting Bushing Width Rear:18mm
Mounting Bolt Diameter Front:8mm
Mounting Bolt Diameter Rear:3/8” (9.53mm)
Leverage Ratio:* 2.36 : 1 - *Note: All VPP leverage ratios vary throughout the travel, so there is not a constant linear ratio. This is the average
Rear Shock Setup:Because it is highly likely the original rear shocks on older models are repaired/replaced/ upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it.The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compres- sion damping, etc.) set to rider preference.Recommended sag is 13-18mm at the shock shaftThis equates to approximately 20-30% of the total rear wheel travel. Less sag = a firmer sus- pension feel.For Air rear shocks, set the air pressure to match the recommended sag.Typically for this model the PSI is equal to rider weight (150lb rider = 150psi) but again this varies by rear shock model.

Torque Specs

FastenerDescriptionPrepTorqueDownload
26-10186Allen chainring bolts (4)Loctite 242115 Inch lbs-
26-10205M5 x 8 socket head cap screw and washer (2 ea)Loctite 24290 inch lbs-
26-10213Upper Link to Swingarm (also is rear shock axle) - M6 X 1 X 14.2 domed socket head cap screw (2)Loctite 24295 inch lbs-
26-10476 and 26-10477Upper Link to Seat Tube - Allen chainring bolt and nut (2 ea)Loctite 24290 inch lbs-
26-10222Dropout to Chainstay M8 X 1.25 X14 domed socket head cap screw (1)Loctite 242110 inch lbs-

Replacement Parts

Propack Part Number:04-05058
Bearings-Only Part Number:04-05037
Dropout/Derailleur Hanger:04-05021
Upper Link:04-05053
QR Seatpost Collar:34-15543
Bearing Press and Removal Tool:10-05032
blur lt 1 geometry