Logan Peat's Custom Santa Cruz Slopestyle Bike

April 17 — 2015 | Santa Cruz, CA

Santa Cruz Bicycles has sponsored Logan Peat for nearly a decade now, and his feedback has been key in the development of the Jackal and the now-retired Blurs. As 2015 approached, Logan needed a 26", full-suspension bike, which we no longer produce. Only one thing to do, then — design and build one just for Logan in our Santa Cruz, California factory. Design was handled by Head Engineer Nick Anderson, and everything was done in-house, from the frame manufacture, to the link machining, to the stunning, raw-to-white fade powdercoat. Scroll through for some photos we took along the way. The people you see alongside Logan in the photos below are Mike Woods, who welded Logan's frame, and Victor Sanchez, who did the powdercoating. 

Some geometry notes for those interested (all measurements reflect a fork with a 482mm axle-to-crown dimension):
Stack: 555mm
Reach: 430mm
Chainstay Length: 400mm
BB Height: 328mm
Head Tube Angle: 69 degrees
Seat Tube Angle: 75 degrees
Seat Tube Length: 350mm

 

logan1.jpg

Santa Cruz Image
David Smith

 

logan2.jpg

Santa Cruz Image
David Smith

 

logan3.jpg

Santa Cruz Image
David Smith

 

logan4.jpg

Santa Cruz Image
David Smith

 

logan5.jpg

Santa Cruz Image
David Smith

 

logan6.jpg

Santa Cruz Image
David Smith

 

logan7.jpg

Santa Cruz Image
David Smith

 

logan9.jpg

Santa Cruz Image
David Smith

 

logan11.jpg

Santa Cruz Image
Gary Perkin

 

logan12.jpg

Santa Cruz Image
Gary Perkin

 

logan13.jpg

Santa Cruz Image
Gary Perkin

 

logan14.jpg

Santa Cruz Image
Gary Perkin

 

 

logan16.jpg

Santa Cruz Image
Gary Perkin

 

logan2.jpg

Santa Cruz Image
Gary Perkin

Previous Next Post Links