Built for big days in big terrain.

Key Features:

  • Wheel size: 29"
  • Rear travel: 135mm

Geometry & Sizing

Rollover table below to highlight frame dimensions.

Low - 29er Standard

Measured with a fork with a 551mm axle-to-crown measurement and a 51mm offset.

MLXL
Reach430mm16.93"450mm17.72"475mm18.7"
Stack604mm23.78"613mm24.13"623mm24.53"
Head Tube Angle67°67°67°67°67°67°
Seat Tube Length420mm16.54"450mm17.72"490mm19.29"
Front Center730mm28.74"752mm29.61"781mm30.75"
BB Height337mm13.27"337mm13.27"337mm13.27"
BB Drop33mm1.3"33mm1.3"33mm1.3"
Wheelbase1165mm45.87"1187mm46.73"1215mm47.83"
Chainstay Length435mm17.13"435mm17.13"435mm17.13"
Head Tube Length90mm3.54"100mm3.94"110mm4.33"
Top Tube Length601mm23.66"622mm24.49"650mm25.59"
Seat Tube Angle74.3°74.3°74.3°74.3°74.3°74.3°
Standover Height710mm27.95"713mm28.07"720mm28.35"
Eye to Eye Length

Frame Sizing

m
5'4"163 — 5'9"175cm
l
5'9"175 — 6'1"185cm
xl
6'1"185 — 6'6"198cm

Tech Support

Can I mount a front derailleur?

No, this bike is not compatible with a front derailleur.  Single ring only!

Is the 148x12 derailleur hanger the same as the 142x12 hanger?

No, it's not. We had to make a new derailleur hanger to go with the new dropout. They look similar, but the easiest way to tell them apart is the finish. Our 142x12mm hangers have a bead-blasted finish, while the 148x12mm hangers have a smooth, machined finish. 

What Happens if I run a 150mm Fork with 29" Wheels?

If you keep your fork at 150mm when swapping from 27.5+ tires to 29" tires, it will result in a bottom bracket height increase of 3.4mm, and your head angle and seat angle will get 0.4 degrees slacker. 

What Kind of Headset Do I Need?

This bike uses an integrated headset with drop-in bearings and molded-in bearing races. The SHIS measurement is IS41 (upper) and IS52 (lower). 

What size bottom bracket shell does this bike use?

We use a standard 73mm threaded BB. Nearly any crank on the market (besides BB30 cranks) will fit.

What size seatpost do I need?

This bike uses a 31.6mm seatpost.  Always ensure it is inserted into the frame a minimum of 4" (100mm).

What's the Biggest 27.5+ Tire I Can Fit?

2.8in tires fit really nicely, and 3.0s will fit, but they can be a bit tight. If you have a lower-profile tire, and don't see a lot of mud, you can definitely run a 3.0. If you're looking for more aggressive rubber, or ride in muddy conditions regularly, you'll want to stick to 2.8s. 

What's With The Chip?

The reversible chip at the shock mount is designed to maintain the frame's geometry when swapping between standard 29-inch tires and 27.5+ tires. The "Low" setting is designed for 29er use, and the "High" setting for 27.5+. While 27.5+ tires have a diameter that's similar to the 29er tire, it's not quite equal, so reversing the chip is a must to maintain the handling characteristics. 

Flipping the chip to "High" without swapping to 27.5+ tires results in an increase of 3.1mm to bottom bracket height, and an increase of 0.25 degrees to your head and seat angles.