Close X

FACTORY SALE

Limited time only. Subject to availability.

blur xc 1 hero 1
blur xc 1 detail 2
blur xc 1 detail 1

Overview

Model Version:XC 1
Production Start:2005
Production End:2008
Suspension/Pivot System:VPP - Virtual Pivot Point
Material:Aluminum - 6000 series
Rear Wheel Travel:115mm
Size Range:XS, S, M, L

Frame Specs

Compatible Forks:80mm to 100mm total travel - 100mm travel max
Headtube/Headset:1-1/8" Straight - External. S.H.I.S EC34/28.6 EC34/30
Seat Post:30.9mm - Minimum insertion 100mm
Front Derailleur:34.9mm Top Pull/Top Swing (Low Clamp)
Front Derailleur Clamp:160mm rotors max
BB Shell Width:68mm - Threaded - ISO
Chainline Spec:50mm
Recommended Max Tire Size:2.1 - may vary by tire and rim model
Brakes:Rim Brake and ISO Disc Brake Mounts
Rear Hub:135mm x 10mm (QR style)
Seatpost Clamp:34.9mm

Shock Specs

Rear Shock Eye-to-Eye:XS & S frame sizes: 6.5"/165mm - M & L frame sizes: 7.875”/200mm
Stroke:XS & S frame sizes: 1.5"/38mm - M & L frame sizes: 2.0"/50mm
Mounting Bushing Width Front:22mm
Mounting Bushing Width Rear:18mm
Mounting Bolt Diameter Front:8mm
Mounting Bolt Diameter Rear:3/8” (9.53mm)
Leverage Ratio:XS & S frame sizes: *3.0 : 1 - M & L frame sizes: *2.3 : 1 - *Note: All VPP leverage ratios vary throughout the travel, so there is not a constant linear ratio. This is the average
Rear Shock Setup:Because it is highly likely the original rear shocks on older models are repaired/replaced/ upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it.The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compres- sion damping, etc.) set to rider preference.Recommended sag is for the XS and Small frame sizes is 8-12mm Recommended sag is for the Medium and Large frame sizes is 10-15mm This equates to approximately 20-30% of the total rear wheel travel.Less sag = a firmer suspension feel.For Air rear shocks, set the air pressure to match the recommended sag.Typically for this Medium and Large size frames with Fox rear shocks the PSI is equal to rider weight (150lb rider = 150psi). For the XS and Small sizes the typical pressure is weight + 25psi (150lb rider = 175psi) but again this varies by rear shock model. Sag is the key.

Torque Specs

FastenerDescriptionPrepTorqueDownload
Allen chainring style bolts (4)Loctite 242115 Inch lbs-
M5 x 8 socket head cap screw and washer (2 ea)Loctite 24290 inch lbs-
Upper Link to Swingarm (also is rear shock axle) - M6 X 1 X 14.2 domed socket head cap screw (2)Loctite 24295 inch lbs-
Upper Link to Seat Tube - Allen chainring bolt and nut (2 ea)Loctite 24290 inch lbs-
Dropout to Chainstay M8 X 1.25 X14 domed socket head cap screw (1)Loctite 242110 inch lbs-

Replacement Parts

Propack Part Number:04-05058
Bearings-Only Part Number:04-05037
Dropout/Derailleur Hanger:04-05021
Upper Link:04-05053
Lower Link:29-10969
QR Seatpost Collar:34-15543
Bearing Press and Removal Tool:10-05032
blur xc 1 exploded 3
blur xc 1 exploded 2
blur xc 1 exploded 1
blur xc 1 geometry