Bronson 90
Ausstattungen & Spezifikationen
*Bitte beachte: Wir sind ständig bemüht, die technischen Daten korrekt anzugeben, aber Änderungen sind vorbehalten.
| Rahmen | |
|---|---|
| Material | |
| Eigenschaften | |
| Frame | |
| Federweg | |
| Gewicht | |
| Laufradgröße | |
| Federung | |
| Gabel | |
| Dämpfer | |
| Lenker-Hebel | |
| Antrieb | |
| Tretlager | |
| Kassette | |
| Kette | |
| Kettenführung | |
| Kurbellänge | |
| Kurbelgarnitur | |
| Umwerfer vorne | |
| Left Shifter | |
| Schaltwerk | |
| Right Shifter | |
| Schalthebel | |
| Bremsen | |
| Bremsen | |
| Front Brakes | |
| Bremsscheibe vorne | |
| Rear Brakes | |
| Bremsscheibe hinten | |
| Bremsscheiben | |
| Cockpit | |
| Bar Width | |
| Sattelstützenlänge | |
| Grips / Bar Tape | |
| Lenker | |
| Steuersatz | |
| Sattel | |
| Sattelstütze | |
| Vorbau | |
| Vorbaulänge | |
| Laufräder | |
| Felge vorne | |
| Nabe vorne | |
| Vorderreifen | |
| Felge hinten | |
| Nabe hinten | |
| Hinterreifen | |
| Ventile | |
| Felgen | |
| E-Bike | |
| Akku | |
| Motor | |
| Ladegerät | |
| Ausstattung | |
| Innenlager-Schale | |
| Hintere Bremsaufnahme | |
| Chainguide_standard | |
| Chainline | |
| Schaltauge | |
| Dämpferlänge | |
| Fork Axle to Crown | |
| Gabel-Kompatibilität | |
| Gabel-Offset | |
| Front Derailleur Mount | |
| Steuersatz | |
| Maximale Kettenblattgröße | |
| Max Rotor Size | |
| Maximale Reifenfreiheit | |
| Einbaubreite hinten | |
| Federweg hinten | |
| Recommended Sag | |
| Dichtmilch | |
| Sattelklemmung | |
| Seat Post Diameter | |
| Dämpfer-Einbaumaß vorne | |
| Dämpfer-Einbaumaß hinten | |
| Dämpfer-Einbaumaß unten | |
| Dämpfer-Einbaumaß oben | |
| Dämpferhub | |
| Federungssystem | |
| UDH kompatibel | |
| Flaschenhalteraufnahmen |
Bronson 90
Größe & Geometrie
Wenn Du zwischen zwei Rahmengrößen liegst, empfehlen wir, dass Du beide Optionen testest. Als Anhaltspunkt kannst Du die Reach- und Stack-Werte mit Deinem aktuellen Bike oder anderen bekannten Bikes vergleichen, auf denen Du Dich wohl fühlst. Wenn keine Testfahrt möglich ist, kannst Du Dich auch an den folgenden Tipps orientieren:
| s | m | l | xl | xxl | |
|---|---|---|---|---|---|
| Reach (Hi/Lo) | 435/432 | 460/457 | 480/478 | 500/498 | 525/523 |
| Stack (Hi/Lo) | 623/625 | 632/634 | 641/643 | 659/661 | 668/670 |
| C. Lenkwinkel (Hi/Lo) | 64.2°/63.9° | 64.2°/63.9° | 64.2°/63.9° | 64.2°/63.9° | 64.2°/63.9° |
| K. Steuerrohrlänge (Hi/Lo) | 110 | 120 | 130 | 150 | 160 |
| G. Hinterbaulänge (Hi/Lo) | 437 | 439 | 442 | 445 | 448 |
| Front Center (Hi/Lo) | 771 | 800 | 825 | 853 | 883 |
| H. Tretlagerhöhe (Hi/Lo) | 344/341 | 344/341 | 344/341 | 344/341 | 344/341 |
| BB Drop Front (Hi/Lo) | 29/32 | 29/32 | 29/32 | 29/32 | 29/32 |
| BB Drop Rear (Hi/Lo) | 10/13 | 10/13 | 10/13 | 10/13 | 10/13 |
| E. Radstand (Hi/Lo) | 1208 | 1240 | 1267 | 1299 | 1331 |
| M. Oberrohrlänge (Hi/Lo) | 572 | 595 | 614 | 636 | 662 |
| L. Sitzrohrlänge (Hi/Lo) | 380 | 405 | 430 | 460 | 500 |
| D. Sitzwinkel (Hi/Lo) | 77.6°/77.3° | 77.9°/77.6° | 78.2°/77.9° | 78.3°/78° | 78.4°/78.1° |
| J. Überstandshöhe (Hi/Lo) | 721 | 723 | 725 | 727 | 731 |
Bronson 90
Setup & Support
Egal, ob Du stolzer Besitzer eines Bronson bist oder Dich einfach nur für alle Details interessierst - hier wirst Du fündig.
| Fahrergewicht (lbs) | Fahrergewicht (kg) | Luftdruck (psi) | Sag | Rebound (Klicks von geschlossen) |
|---|---|---|---|---|
| 100 | 45 | 125 | 30%, 17-17.5mm | 8 |
| 120 | 54 | 145 | 30%, 17-17.5mm | 7 |
| 140 | 64 | 165 | 30%, 17-17.5mm | 7 |
| 160 | 73 | 180 | 30%, 17-17.5mm | 6 |
| 180 | 82 | 200 | 30%, 17-17.5mm | 5 |
| 200 | 91 | 220 | 30%, 17-17.5mm | 4 |
| 220 | 100 | 240 | 30%, 17-17.5mm | 4 |
| 240 | 109 | 255 | 30%, 17-17.5mm | 3 |
| 260 | 118 | 275 | 30%, 17-17.5mm | 3 |
| Fahrergewicht (lbs) | Fahrergewicht (kg) | Luftdruck (psi) | Rebound (Klicks von geschlossen) |
|---|---|---|---|
| 120 | 54 | 66 | 13 |
| 140 | 64 | 74 | 11 |
| 160 | 73 | 82 | 9 |
| 180 | 82 | 89 | 7 |
| 200 | 91 | 99 | 5 |
| 220 | 100 | 109 | 3 |
| 240 | 109 | 117 | 1 |
| label | part_number | quantity | name | blurb |
|---|---|---|---|---|
| A | 29-27474 | 1 | Upper Link | |
| B | 11-12681 | 2 | 6900-2RS Bearing | |
| C | 26-15533 | 2 | M10x3 Washer | Apply grease to inner surface |
| D | 26-11612 | 2 | Bearing Dust Shield | Apply grease to inner surface |
| E | 11-12218 | 2 | 6902-2RS Max Bearing |
| label | part_number | quantity | name | blurb | torque |
|---|---|---|---|---|---|
| A | 29-27473 | 1 | Lower Link | ||
| B | 11-17708 | 4 | 6902-1ZR Bearing | ||
| C | 26-11612 | 4 | Bearing Dust Shield | Apply grease to inner surface | |
| D | 26-19126 | 1 | 15x28 Bearing spacer | ||
| E | 26-17013 | 1 | 15x40.25 Bearing Spacer | ||
| F | 26-12678 | 1 | M6 Grease Fitting | 9 Nm | |
| G | 26-15532 | 1 | M5x5 Set Screw | Apply Loctite 242 to threads, titghten until flush | 0.5 Nm |
| label | part_number | quantity | name | torque | blurb |
|---|---|---|---|---|---|
| A | 26-22843 | 1 | Glovebox lid | ||
| B | 26-25333 | 1 | Glovebox bezel | ||
| C | 26-23284 | 4 | M3x8 BHCS | 0.5 Nm | Apply Loctite 242 to threads |
| D | 30-23225 | 2 | Glovebox nut |
| label | part_number | quantity | name | blurb | torque |
|---|---|---|---|---|---|
| A | 08-22209 | 1 | Rear axle 12x173.7 | Apply grease to shaft and threads | |
| B | 23-23491 | 1 | SCB UDH | Interchangeable with Sram UDH | |
| C | 26-23492 | 1 | SCB UDH screw | Reverse thread | 20 Nm |
| D | 30-27472 | 1 | Chainstay Protector | ||
| E | 26-15939 | 1 | M3x12 BHCS | Apply Loctite 242 to threads | 0.1 Nm |
| F | 30-21453 | 1 | Seatstay Protector | ||
| G | 30-23094 | 1 | Lower Link Fender | ||
| H | 26-18382 | 2 | M4x12 BHCS | Apply grease to treads | 0.65 Nm |
| label | part_number | quantity | torque | name | blurb |
|---|---|---|---|---|---|
| A | 26-20122 | 2 | 16 Nm | M10x23 Screw | Apply Loctite 242 to threads only, apply grease to shaft only |
| B | 08-22343 | 1 | 20 Nm | Pivot Axle M15x91 | Apply Loctite 242 to threads only, apply grease to shaft only |
| C | 26-15633 | 3 | M6 Tapered Washer | Apply grease to surface | |
| D | 26-11817 | 3 | M6 Washer | ||
| E | 26-15947 | 3 | 9 Nm | M6x20 SHCS | Apply Loctite 242 to threads |
| F | 08-16291 | 1 | 20 Nm | Pivot axle M15x68.5 | Apply Loctite 242 to threads only, apply grease to shaft only |
| G | 08-16292 | 1 | 20 Nm | Pivot axle M15x80.5 | Apply Loctite 242 to threads only, apply grease to shaft only |
| H | 26-15946 | 1 | 5.6 Nm | M5x20 SHCS | Apply Loctite 242 to threads |
| I | 26-12652 | 1 | M5 Washer | ||
| J | 26-27530 | 1 | M5 Tapered Washer | Apply grease to surface | |
| K | 08-27508 | 1 | 13.6Nm | Shock Mount Axle M10x63 | Apply Loctite 242 to threads only, apply grease to shaft only |
| L | 26-22461 | 1 | 20 Nm | M8x45 Shock Bolt | Apply Loctite 242 to threads |
| M | 26-21452 | 1 | M8x2 Flip Chip NDS | Apply grease to surface | |
| N | 26-21451 | 1 | M8x2 Flip Chip DS | Apply grease to surface |
| label | part_number | quantity | name | blurb | torque |
|---|---|---|---|---|---|
| A | 20-27756 | 1 | Head Tube Badge | Clean frame surface, center on headtube | |
| B | 30-23750 | 1 | Shuttle Guard Mount | ||
| C | 30-22560 | 1 | Shuttle Guard | ||
| D | 26-21249 | 2 | M4x8 BHCS | Apply grease to threads | 0.65 Nm |
| E | 30-27471 | 1 | Downtube Protector | ||
| F | 26-18382 | 2 | M4x12 BHCS | Apply grease to treads | 0.65 Nm |
| G | 34-20201 | 1 | 36.4 Seat Collar |
| Frame Size | Flip Chip | Setup Key | Setup Cog | 30T | 32T | 34T | 36T |
|---|---|---|---|---|---|---|---|
| S | High | B | 7 | 116 | 116 | 118 | 118 |
| M | High | B | 7 | 116 | 116 | 118 | 118 |
| L | High | B | 7 | 116 | 118 | 118 | 120 |
| XL | High | B | 7 | 116 | 118 | 118 | 120 |
| XXL | High | B | 7 | 118 | 118 | 120 | 120 |
| S | Low | B | 7 | 116 | 116 | 118 | 118 |
| M | Low | B | 7 | 116 | 116 | 118 | 118 |
| L | Low | B | 7 | 116 | 118 | 118 | 120 |
| XL | Low | B | 7 | 116 | 118 | 118 | 120 |
| XXL | Low | B | 7 | 118 | 118 | 120 | 120 |
Bronson 90
Get access to the exclusive SCB Owners Club which gives you access to added levels of rider support, treats, opportunities and benefits. Join the club today for free! It takes just five minutes to receive a lifetime of membership perks.
Learn MoreWe build Santa Cruz bicycles to be durable and long lasting, and then back them up with legendary support and a warranty of the highest standard.
Santa Cruz Bicycles offers free replacement pivot bearings to the original owner for as long as they own their bike.
When you can only have one bike, and your mission is to ride that bike into oblivion, then this is the one. From manicured bike parks to blown out loamy berms, alpine lines to backyard trails, the Bronson is as at home in the air as it is in the dirt. For the rider with a Peter Pan disposition or who wants to get into a pan flat tabletop position, the Bronson encourages bad behavior.
Standout Features
Explore the trail taming highlights that make the Bronson so special.
SRAM T-Type 90
Glovebox
VPP™ Suspension
Flip Chip
C Carbon Frame
Alle Details
Ausstattungen& Spezifikationen
Geometrie& Größe
Setup& Support
Other Builds
Bronson 70
Basismodell mit denselben Reifen und großen Bremsscheiben wie alle BRONSON-Modelle. Mechanische SRAM 70 TRANSMISSION Schaltung
Bronson GX AXS
Der leistungsstarke Allrounder. Elektronische SRAM GX Transmission, SRAM Maven Bremsen und Fox Elite Fahrwerk.
Bronson R
Basismodell mit den gleichen Reifen und großen Bremsscheiben wie bei jedem Bronson. Hochwertiges Fahrwerk mit RockShox Lyrik Gabel und Fox Float Rhythm Dämpfer, nur ohne die externen Einstellmöglichkeiten.
Bronson S
Das zuverlässige Arbeitstier. Bessere Naben, Steuersatz und Sattelstütze. Bessere Federung mit mehr Einstellmöglichkeiten, SRAMs mechanischer Eagle-Antrieb und SRAM Vierkolbenbremsen.
Bronson X0 AXS
Überlässt nichts dem Zufall. CC Carbon-Rahmen, elektronischer SRAM X0 Transmission-Antrieb, Fox Factory Fahrwerk und SRAM Maven-Bremsen
Bronson X0 AXS RSV
CC Carbon-Rahmen, elektronischer SRAM X0 Transmission-Antrieb, Fox Factory Fahrwerk und SRAM Maven-Bremsen , plus die legendären RESERVE Carbon-Laufräder.