available spring 2007
Resurrection Time!
The Bullit is Back! Bigger, bolder, badder and better than ever before, the new and freshly evolved Bullit marks another
chapter of Santa Cruz's single pivot revival.

available spring 2007
After taking a couple years off, this all-duty workhorse returns to the lineup ready to tackle anything and everything, smoothing out trail rides and sucking up downhill punishment with sweet handling, low maintenance simplicity.

Custom drawn double-butted aluminum tubes form the completely redesigned front triangle, while a new and vastly stiffened swingarm pivots on a massive 20mm axle riding in oversize bearings (oversize bearings that come with a lifetime guarantee, no less).

There's over 7-inches of rear wheel travel, it'll fit 8-inch brake rotors in the back, and the stout 1.5" headtube and gusseted top and down tubes allow you to put whatever the hell kind of fork you want up front.

Combine that with the ability to run either standard, q.r friendly,135mm rear dropouts, or 150mm thru-axle dropouts, as well as an optional floating rear brake kit, and the Bullit is equipped to handle any kind of terrain imaginable.

Choose your target, and squeeze the trigger...
available spring 2007


20mm Swingarm Pivots = Stiff!
  • Huge 20mm swingarm pivot
  • Lifetime pivot bearing guarantee
  • 135 q.r OR 150mm thru-axle rear dropouts
  • Optional 150mm axle fully floating rear brake kit
  • 178mm rear wheel travel
  • 1.5" headtube
  • Wrench friendly! All frame parts can be disassembled (and assembled) with four readily available allen wrenches, and the swingarm bearing cups use a Shimano external BB tool.
  • Hard anodized 7075 aluminum hardware
  • Available in either powdercoat or anodized finishes
  • Different cable routing options (either full housings or split housings, take your pick)
  • Build it up anywhere between 32 and 44 pounds, climb it like a long travel trail bike, kill it like a freeride bike. It's even built to be bar-spin friendly...
    		•

    New Gussets and a burly 1.5" headtube
    Lifetime Bearing Warranty
    Geometry Chart (measured in inches)
    Size TT ST ST (angle) HT HT (angle) Wheel Base BB (height) CS (length)
    Small  21.5  15  70.5 (deg.)  4.1  67.5 (deg.)  41.9  14.3  17
    Medium  22.8  17  70.5 (deg.)  4.5  67.5 (deg.)  43.2  14.3  17
    Large  24  19  70.5 (deg.)  5.1  67.5 (deg.)  44.5  14.3  17
    Powder Coat paint, with DHX3 coil shock - $1199 Ano, with DHX3 coil shock - $1350
    Powder Coat Colors
  • Lime Green (as shown)
  • black
  • white
  • orange
  • gangreen
  • liquid blue
    		•  Upgrade Color Options
  • Polished
  • 2 Anodized color to be announced later
    		•

    New Bullit pictured in Lime Green with the X9 AM kit (with E.13 Chain Guide upgrade). Totem Coil Fork and Fox DHX 5 Air rear shock
    available spring 2007