Santa Cruz Bicycles

Tallboy LT Carbon

  • maskBlue & Black
  • maskMatte Carbon & Grey
Santa Cruz Bicycles Santa Cruz Bicycles

Tallboy LT Carbon

If big wheels, big rides, big races and big adventures are your thing?

Then the Tallboy LT Carbon is the big ticket for you. Our 135mm VPP 29er hauls riders through such brutal events as the Downieville Classic, the Mountain of Hell and the Trans Provence, to places where our lifetime bearing and crash warranties mean something... but returning with stories from the edge means more.

Features

  • 135mm VPP™ suspension
  • 29" wheels
  • Sizes: S, M, L, XL +XXL (carbon only)
  • 142mm rear axle spacing
  • Forged upper and lower links
  • Double sealed pivots with grease ports for low maintenance
  • Collet axle pivots- lock in place without pinch bolts.
  • Angular contact bearings maximize stiffness.
  • Standard or Direct mount rear derailleur option
  • ISCG-05 tabs for chainguide compatibility
  • Stealth and external seatpost cable routing
  • 73mm threaded bb: creak-free riding and easy installation
  • Molded rubber frame protection

Geometry and Sizing

Size Chart

m
5'5" — 5'10"
l
5'10" — 6'1"
xl
6'1" — 6'4"
xxl
6'4" — 6'7"

Geometry Table

MLXLXXL
Top Tube Length586.4mm23.1in611.9mm24.1in637.3mm25.1in657.9mm25.9in
Seat Tube Length450mm17.7in495mm19.5in533.4mm21in558.8mm22in
Head Tube Angle69.4°69.4°69.4°69.4°69.4°69.4°69.4°69.4°
Seat Tube Angle72.6°72.6°72.6°72.6°72.6°72.6°72.6°72.6°
BB Height342.6mm13.5in342.6mm13.5in342.6mm13.5in342.6mm13.5in
Wheelbase1113.4mm43.8in1138.8mm44.8in1164.8mm45.9in1184.1mm46.6in
Head Tube Length100mm3.9in100mm3.9in110mm4.3in120mm4.7in
Chainstay Length450.1mm17.7in450.1mm17.7in450.1mm17.7in450.1mm17.7in
Standover Height731.8mm28.8in746.7mm29.4in772.2mm30.4in795mm31.3in
Reach388.8mm15.3in414.3mm16.3in437mm17.2in457mm18in
Stack630.1mm24.8in630.1mm24.8in639.8mm25.5in649.3mm25.6in
Geometry based on 548mm axle-to-crown (140mm fork)

Shock: Fox Float CTD Evolution

Tech Info

Frame MaterialCarbon
Suspension SystemVPP
Front DerailleurClamp
Headset Diametermixed taper 1.5" Lower, 1'1/8" upper
Seat Post30.9mm
Compatible Fork Sizes130-150mm
BB ShellStandard
Brake Typesdisc, 203mm rear rotor max
Water Bottle Mounts1x bottle cage mount

Shock Setup

Shock: Fox Float CTD Evolution

Rider WeightAir PressureShock Sag
100lbs (45.5kg)90 psi12-15 mm
120lbs (54.4kg)110 psi12-15 mm
140lbs (63.5kg)130 psi12-15 mm
160lbs (72.6kg)150 psi12-15 mm
180lbs (81.8kg)170 psi12-15 mm
200lbs (90.7kg)190 psi12-15 mm
220lbs (99.8kg)210 psi12-15 mm
240lbs (108.8kg)230 psi12-15 mm
260lbs (117.9kg)255 psi12-15 mm
280lbs (127kg)280 psi12-15 mm

Builds & Price

Frame Only

  • Tallboy LT Carbon frame + Float CTD5.18 lbs / 2.4 kgs$2699 USD
  • Tallboy LT Carbon frame + Float CTDK5.18 lbs / 2.4 kgs$2899 USD

Full Bikes

Click here to customize.

Kits
ForksR AM 29SPX AM 29 XO-1 AM 29 XX1 AM 29 XTR AM 29 §
34 Float CTD 140 $415013.44kgs29.5lbs$583012.94kgs28.29lbs$627212.44kgs27.3lbs$761712.14kgs26.52lbs$77975.44kgs27.35lbs
34 Float CTDK 140$482213.49kgs29.6lbs $569912.99kgs28.39lbs $599912.49kgs27.4lbs$797812.19kgs26.62lbs$81585.49kgs27.45lbs
Sektor Gold 140$434713.206kgs29lbs$571612.706kgs27.79lbs$615812.206kgs26.8lbs$750311.906kgs26.02lbs$76835.206kgs26.85lbs
  • Pricing in USD. Price and specifications subject to change without notice.
  • Price includes shock Float CTD
  • ENVE wheel upgrade available.
  • § 2X chainring upgrade available free of charge.
  • Santa Cruz Best Deal.

F.A.Q.

Can I mount a chainguide to my bike?

Yes, this bike has been designed with ISCG-05 chainguide mounting tabs. We have had great luck with the E13 LG1 Tr, MRP Lopes guide or Mini G3. For dual ring guides, try the E13 TRS+Dual or MRP 2x guides. These should fit with minimal or no modification.

Can I use a dropper post on this bike?

Yes, we have included routing for remote-actuated telescoping seatposts on the frame. Some newer frames also have internal routing for "stealth" posts.

It looks like the lower link is off center in my frame- is everything ok?

Yes- this is correct. With our newer pivot system, the pivot axle draws the link over to one side in order to properly preload the bearings. This offset is accounted for in the frame design so everything ends up nice and straight in the end.

Should I grease the headset cups when I install them?

Yes, we recommend this. Do not use the Carbon Assembly Compound on the headset, as it will make it more difficult to remove from the frame.

What fork sizes are recommended?

The Tallboy LT is designed for a 130-150mm fork. We spec 140mm, which we feel balances the bike the best.

What is the torque spec for the front derailleur?

Torque the front derailleur to 45 in/lbs.

What is the torque spec for the seat collar?

We don't provide a torque spec for the seatpost, because it really depends on what seatpost you are using. Some seatposts are slippery, and require more torque to stay put, and others are very thin- and can be crushed by overzealous tightening. Some are both slippery and thin... Make sure you use the Carbon Assembly Compound included with your frame, and use some common sense.

You will not damage your frame by overtightening the seat collar, assuming you have a 30.9mm seatpost in it.

What kind of front derailleur do I need?

This bike uses a 34.9mm Bottom Swing (high clamp), Top Pull front derailleur.

What kind of headset does this bike use?

We use a headset generally referred to as "mixed tapered". This is a 44mm internal upper cup, with an external 49mm lower cup. The SHIS name is ZS44/28.6 EC49/40.

What kind of rear brake adaptor do I need?

This frame uses a standard IS rear brake mount. Just pick your rotor size and order the correct adaptor to go from IS to post mount (all modern brakes).

What q-factor should I use for the cranks?

On any crank with optional Q-factor, choose the wider version.  166 for Sram XX, or 168 for XX1.  For Shimano doubles, we recommend the M980.  

What size bottom bracket shell does this bike use?

We use a standard 73mm threaded BB. Nearly any crank on the market (besides BB30 cranks) will fit.

What size hub do I need?

This bike uses a 142x12 through-axle rear hub, and includes a DT RWS axle.

What size seatpost do I need?

We use a 30.9mm seatpost. Always ensure it is inserted into the frame a minimum of 100mm (4").

What size shock does it use?

This bike uses a 200x51mm shock with 22x8mm eyelet hardware (21.8mm x 8mm for SRAM). Please do not use any other shock size or modify with eccentric shock bushings- this can cause damage or clearance issues with the frame.

Why does this frame use a standard thread-in bottom bracket, when many of your competitors use press-in style (BB30, Pressfit 30, BB90, BB92, BB86)

It is true that there are some slight weight savings available with the various pressfit bb designs (exact weight savings obviously vary depending on system, frame manufacturing techniques, and crank model), but we don't feel this small savings make up for the inconveniences. We are still able to make a frame that is lighter than most of our competitors, while still using a heavier bb system. There are a number of disadvantages that exist with press fit systems:

1) Special installation and removal tools are required for these parts, including a headset press. This is not convenient for most home mechanics, and they are quite expensive. Traditional external BB's can be installed or removed with a simple $10 hand tool.

2) "Permanently installed cups". Shimano doesn't recommend removing and re-installing their press in bb cups (as they may become damaged), so moving parts from bike to bike is no longer an option. http://techdocs.shimano.com/media/techdocs/content/cycle/SI/SI_0053A_001...

3) Creaking or shifting bb's can be common with these systems. Since the bearing is pressed into a cup, which is then pressed into the frame- it can be hard to get all of the press fits snug- without being too tight on the bearing or too loose in the frame.

4) Reasonable tube sizes. One of the most commonly claimed advantages of a larger bb shell is the larger diameter downtube that goes with it. This may be an advantage on road bikes, where tubes can be incredibly thin and large for optimal stiffness. On a mountain bike, this area of the frame sees a lot of abuse from rocks and crashing, and needs to have a certain amount of wall thickness to survive actual use. Using what we consider a "safe" wall thickness and carbon layup, and a fairly typical tube diameter, we get an exceedingly stiff, light, durable product. If we used a larger downtube, we would either have a heavier frame (same wall thickness but larger diameter), or a less durable product (thinner walls and larger diameter).

5) Chain clearance. Take a look at some of our competitors frames with press in bb shells. The down tube comes so close to the chainrings that many frames have chainsuck guards on the downtube! In our mind, the chain should be able to fall off on a mountain bike and not get jammed between your crank and thin-walled carbon downtube.

6) Backwards compatibility: Many of our customers purchase a frame and build it up with their choice of parts, or parts from an old bike. By using a standard bb, we are compatible with everything without requiring confusing adaptors.

7) Chainguide compatibility: While it may seem strange to talk about putting chainguides on a short travel bike, it is becoming more common now with 10 speed drivetrains. Thread in bb's mean the frame is compatible with bb mount chainguides. We like versatility....